594592
35
Verklein
Vergroot
Pagina terug
1/124
Pagina verder
Using your brushcutter; Operating and maintenance instructions
ENGLISH 15
7.5 Information regarding the line head
(available as accessory)
When using the nylon head, always ensure that you
operate only with the correct length of line. When the
contact shield is fitted, the line will always be
trimmed to the permissible length automatically (a
line trimming blade is fitted into the shield). There is
a high risk of injury, and the engine is subjected to
excessive loads leading to a risk of damage, if nylon
lines are left too long.
Therefore, when converting the cutting tool from
grass cutter blade to nylon head, always fit the
standard contact shield together with the protective
bar and fitted line trimming blade.
Adjusting the cutting line
When using a semi-automatic nylon head:
(schematic diagram)
Whilst the brushcutter is running without load, but
with rotating nylon head, lightly push the nylon head
several times onto ground with growth cover. The
cutting line will be dispensed in stages. With each
action, approx. 30 mm line will be dispensed. The
line trimming blade will correct any excess length.
When the cutting line is fully spent, you can replace it
with line available Ø 2,4 mm under part no. 6900942
or Ø 3,0 mm part no. 6900974 (accessory).
8. Operating and maintenance instructions
8.1 General operating and maintenance
instructions
The maintenance and the repair of modern machines
as well as their safety-relevant assemblies require
qualified specialised training and a workshop
equipped with special tools and test equipment.
Consequently the manufacturer recommends that all
tasks not described in these operating instructions be
carried out by a specialised workshop. That
specialist has the required training, experience, and
equipment at his disposal, to provide you with the
most cost-effective solution for such work. He will
provide additional help in word and deed.
After a running-in time of app. 5 hours, all accessible
screws and nuts (except the carburettor adjusting
screws) must be checked for tightness and they must
be retightened, if required.
Check the cutter regularly and whenever you notice
any irregularities, or when the cutter/contact shield
becomes blocked. For this, switch off the engine and
wait until the cutter has come to a complete standstill.
Pull the spark plug cap, and remove grass, debris,
etc. from the cutter support. Immediately replace
blunt or damaged tools, even if they display only
small cracks do a ”ping” test.
It is best to store the equipment in a dry, safe location
with a full fuel tank. There should be no open flame or
similar nearby. For longer periods without using the
equipment (longer than four weeks), see chapter “9.8
Shutdown and storage”.
8.2 Gearbox lubrication
To lubricate the bevel gear drive, use SOLO "Special
gearbox grease" (part no. 008318025). Check the
grease level weekly and top up, if required (approx.
every 20 - 50 hours).
Remove the filler plug from the side of the gearbox. If
no grease is visible inside, top up with grease (top-up
quantity approx. 5 10 g).
Replace and tighten the filler plug.
Please note: Do not overfill with grease, as that may
lead to the gearbox overheating. Never fill the
gearbox casing to the top with grease.
Tip: If required, top up with a maximum of 5g grease.
It is preferable to check more frequently (e.g. before
you start working) whether grease is still visible.
Your SOLO dealer workshop is happy to help you in
case of doubt.
Fig. 16
Fig. 17
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Al-ko AL-KO 137 SB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Al-ko AL-KO 137 SB in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 8,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info