630583
43
Verklein
Vergroot
Pagina terug
1/167
Pagina verder
4: Recording
Page 34
Sampling Frequency
To record via the digital inputs, the DR16pro must be set to the same sampling frequency as that
used by the incoming digital signal. This is because the DR16pro has to synchronize with the
incoming signal (word sync). If you are recording from a CD, prerecorded MD, this will be 44.1kHz.
If you are recording from a DAT that was recorded via analog inputs, this will be 48kHz.
If you attempt to connect a digital input from a source with a sampling frequency different than the
current setting of the DR16pro, the message “BAD INPUT” will be displayed when you press a
TRACK REC key. See “Selecting the Sampling Frequency” on page 31.
Digital Audio Interfaces
The DR16pro includes a built in stereo (2-channel) AES/EBU interface that can be used as a
record source for any track. Additionally, a multi-channel digital audio option card can be fitted
providing up to an additional 8-inputs and 16-outputs in either AES/EBU or ADAT format.
Digital Audio Formats
There are two industry-standard digital audio formats. Type 1 is usually referred to as AES/EBU
format. Type 2 is also known as S/PDIF format. Both the built in stereo digital audio interface on
the rear panel of the DR16pro (XLR and RCA/phono) can receive either Type 1 or Type 2 signals
as input.
To switch to digital inputs:
1) Press the DIGI key.
The LED over the DIGI key lights. Input channels 1 and 2 are switched to digital. No analog
signals at channels 1 and 2 will be input.
If no digital signal is input at the currently active connector, the LED flashes and the message
“PLL UNLOCK” will flash on the display.
To select the active digital connector:
1) Press the SUB-MENU key.
The indicator in the key will flash and the text “SUB-MENU” will appear on the display.
2) Press the DIGI(D IN) key.
The display will show the currently active connector.
3) Use the JOG/SHUTTLE control to select the digital connector.
4) Press the STORE/ENT key.
The new connector will be selected.
XLR
RCA/phono
Connector Display
DIGIin XLR
DIGIin RCA
43

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Akai DR16 Pro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Akai DR16 Pro in de taal/talen: Engels als bijlage per email.

De handleiding is 1,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info