630583
42
Verklein
Vergroot
Pagina terug
1/167
Pagina verder
4: Recording
Page 33
Input Source
The DR16pro can record from its eight analog inputs, the stereo (two-channel) built-in AES/EBU
digital input, the optional multi-channel digital audio option card (AES/EBU or ADAT) or the inter-
nal two-channel bus signal.
Analog Inputs
The DR16pro has eight analog input connectors on its rear panel. These connectors use 1/4 inch
stereo phone jacks. They accept balanced and unbalanced signals: Tip = hot, ring = cold, sleeve
= ground.
Setting the INPUT Gain Switches
Each pair of the analog inputs (channels 1/2, 3/4, 5/6, and 7/8) has a HIGH/MID/LOW GAIN
switch. Set the gain switches to match the level of the incoming signal. For a low signal level input
such as a microphone, set the switch to the HIGH position. Set the switch to the MID position for
consumer audio equipment (-10 dBu) and the LOW position for professional equipment (+4 dBu).
Setting the GAIN Controls
The front panel GAIN controls allow you to adjust the gain (level) of each analog input channel in
the range of -10 dB to +22 dB. When the controls are at the 9 o’clock position, the gain is 0 dB.
Turn the GAIN controls clockwise to set the channel levels. Adjust the level to get the hottest
possible signal without causing the 0 dB segment of the peak-hold LED bargraph to light.
Note:
The peak-hold meters are after the A/D converters in the signal path. When the amber
0 dB (Peak) segment lights, it indicates the level is too high and digital distortion or clipping
has resulted. You should adjust the GAIN levels so this does not occur.
The meters should be set to “PRE” (pre-mixer monitoring) in the SUB-MENU “MIXER” func-
tions. See “Selecting Pre- or Post- Metering” on page 66.
When recording vocals or acoustic instruments, it is usually a good idea to have a compressor
inserted in the signal path to avoid the distortion that can result due to sudden increases in level.
Digital Inputs
The DR16pro has two digital input connectors on its rear panel: an XLR connector and an RCA/
phono connector used to input AES/EBU and S/PDIF format digital signals.
When you record from a digital source, such as CD, DAT or MD, you cannot adjust the signal level
with the front panel GAIN controls. Most digital audio equipment offer no control over their digital
signal output. This should not present any problem — usable digital audio will have a reasonable
signal level.
It can record from both the built-in stereo digital interface and the 8-input multi-channel digital
audio option card simultaneously allowing up to 10 simultaneous record inputs.
12345678
GAIN
42

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Akai DR16 Pro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Akai DR16 Pro in de taal/talen: Engels als bijlage per email.

De handleiding is 1,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info