Assembly and Operating Instructions Ver. 3 01/2014 (2284)
9
These are used to hold the chair in a stationary position, and are fitted
on either side of the chair on the back wheels. They should not be
used when the chair is moving or to slow it down. They should always
be applied together.
To operate, pull the brake lever back towards the back of the chair.
This will immobilize the chair. To release the brake, move the lever
forwards the front of the chair.
8. Cross Bar
Operation of the cross brace permits the chair to be opened and
closed easily. It should be inspected at regular intervals for signs of
wear and bending.
ROUTINE CHECKS AND MAINTENANCE
1. Upholstery
Upholstery should be routinely cleaned with a mild soap and water
solution. Never use paint remover or thinners on upholstery.
2. Metal Parts
Clean all metal parts with a wax compound such as car wash to
maintain finish. Do not use any obtrusive cleanser that will scratch the
finish on the chair.
3. Cross Brace
Periodically lubricate the centre bolt on the cross brace with light
machine oil.
4. Tyres and Wheels
Examine tyres regularly for wear and replace as necessary. Solid
tyres should be replaced when they become loose on the rim or
cracks appear which expose the mounting wire groove. Check that the
wheels run freely.
5. Castors
Check periodically that the bolt and nut securing the wheel to the
castor fork is tight and allows a snug but free spinning fit. If wheels are
loose or wobble then consult service personnel.
6. Brakes
Regularly check for effective operation and there is no wear or signs
of play.
7. General
Always check before use that the chair folds and unfolds correctly and
that movement both backwards and forwards is in a straight line.
8. Servicing
