782361
79
Verklein
Vergroot
Pagina terug
1/136
Pagina verder
SCOOPY+ S - User Manual
73
Mobile network (integrated module)
This part applies to units equipped with the "HD-4G mobile" option, which integrate a mobile network
access module and antennas.
Prerequisites
A mobile network can be used as interface for AoIP connections. It can be used in voice mode as well
(regular telephone links), especially for the coordination channel (case 3 or 4 mentioned above in 4.5.1).
You must have a subscription and a SIM card granting access to mobile transmission. In The subscription
must include access to the service(s) you intend to use: mobile data (3G/4G) for setting AoIP connections,
and/or telephone service for coordination or backup (case 3 or 4 above) or even as program link.
Mobile networks often set obstacles to AoIP towards a mobile terminal: NAT routers, often symmetric
(which prevents benefitting from a STUN server), etc. Above all, it is rare to be assigned a public IP
address, and is never possible to get a public and fixed IP address.
As a consequence it is very difficult to receive a call without using a SIP server. On the other hand, if the
SCOOPY+ S is registered on a SIP server, once the data connection is active the codec is ready to receive
an incoming call.
Preliminary settings
First insert the SIM card in the SCOOPY+ S (the unit must be powered off for this). See how to proceed in
3.2.2, "Drawer for SIM card " section. Power up the codec, enter the sub-menu Setup / Network /
Mobile Parameters / PIN. Enter the PIN code of the SIM card using the keypad and press . This is
useless, of course, if the card’s PIN code is blank or disabled. Besides, if you check PIN Save, you will not
need to enter the PIN again, even after rebooting the unit.
The network access must be configured using the "Mobile Parameters" menu (Setup / Network /
Mobile Parameters), see details in page 59, Mobile Parameters. The following settings are suitable in
most cases:
Leave "Auto" for the Preferred Techno setting. Conversely, avoid "Only 2G", as the
performance in such case is too poor for AoIP.
Leave "Auto" for the Network Operator setting, unless you have a specific reason to force
this setting.
Select the data mode: Mode / IP Mode.
Activate the mobile data by checking "Data Active". The other parameters are usually
adjusted automatically.
If however the Access Point parameters are not set, or their preset values are not suitable,
you can enter new values: enter Access Point / APN, enter the appropriate access point name
using the keypad and .
You can define a Network Quality: in doubt, select "Middle". The best is to perform a test on
a significant amount of time, and change the setting if the resulting stability is not good
enough.
79

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aeta Scoopy plus S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aeta Scoopy plus S in de taal/talen: Engels als bijlage per email.

De handleiding is 5.56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info