782361
76
Verklein
Vergroot
Pagina terug
1/136
Pagina verder
70
SCOOPY+ S - User Manual
4.5. Setting up a link
For dealing with links with the SCOOPY+ S, generally you should go through the following steps:
1. Select the basic options that will essentially determine the operation: audio operation
(mono/stereo, with/without coordination), transmission network type. This is described below
(4.5.1, Basic options).
2. Prepare or check the settings for the network interface(s) you will use. See below (4.5.2,
Preparing the network interface(s)).
3. Select the suitable coding configuration for the link. See below (4.5.3, Setting the coding
configuration).
4. Select or dial the destination address/number and launch a call to the desired destination. This
is described below (4.5.4, Launching calls).
5. Alternatively, the unit can also receive calls from remote units. See below (4.5.5, Receiving
calls).
4.5.1. Basic options
Before setting up links with the unit, you should select the basic operating mode. For this, the main
choices to do are:
What will be the main network for the transmission? Depending on the equipment of the
SCOOPY+ S and the available resources, the type of network is ISDN, Ethernet, mobile IP, mobile
voice or POTS. In addition, there may be alternate interfaces: for instance, the mobile access
may be using the internal module (HD-4G option), or an external USB device.
Mono or stereo for mixing and transmitting? Of course, this choice is linked to the previous
one.
Will you use coordination thanks to a mobile voice link? This is possible if the "HD-4G mobile"
option is installed, and in mono operation.
The table below summarizes the possible combinations available:
Table 7 Basic operating modes
Case 1: only one link is set for mono operation; any available network interface can be used.
Case 2: only one link is set for stereo operation. This case is automatically selected as soon as
stereo encoding is selected. It is not supported by all network types.
Case 3: a mobile voice link (using the integrated mobile access module) is used for a
coordination channel. This case requires the presence of an internal mobile network access
module (HD-4G mobile option). It is selected when the choice for "Routing for Mono" is
"Program & Coord.".
Case 4: a variation of the previous case; this time the mobile voice link is used as a backup, to
which the remote control room can switch in case the normal program link is lost. This case is
selected when the choice for "Routing for Mono" is "Main & Backup".
ISDN Ethernet Mobile IP POTS Mobile voice
1 - Mono
2 - Stereo
3 Mono Coord
4 Mono Backup
PGM
Main
Case
Usage of
HD-4G option
Audio
mode
Transmission
PGM
PGM
76

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aeta Scoopy plus S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aeta Scoopy plus S in de taal/talen: Engels als bijlage per email.

De handleiding is 5.56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info