782361
62
Verklein
Vergroot
Pagina terug
1/136
Pagina verder
56
SCOOPY+ S - User Manual
RTP Port (SIP): the default port for RTP/SIP audio streams is 5004 (UDP), but you can enter a
custom value here if desired.
RTP Port (Direct): port allocated to the transmission in Direct RTP mode; should not be the
same as the RTP port for SIP.
RTP DSCP: if the transmission network supports DiffServ to manage the media priority, you
can set here the type of service which is assigned to the stream transmitted by the codec.
You should enter here a decimal value, e.g. 46 for the maximal priority code "Expedite
Forwarding". The default value is 0, "Best Effort".
Packet Replication: (see also 2.1.1 and page 10 regarding this feature) you can select here
the setting for packet replication:
0 => standard mode without replication (default setting)
1 => packet replication without interleaving
2 => packet replication with interleaving: the second packet is delayed; robustness is improved
but latency is increased.
Direct RTP Accept: when this box is checked, the codec accepts incoming RTP streams. If it is
not checked, incoming streams on the Direct RTP port are ignored.
Direct RTP Send only: if this is activated and the operator sets an outgoing call, the unit does
not expect to receive an RTP stream and rather decodes its own stream. The device keeps
sending data until the user releases the link on purpose. In this use case the "RTP Timeout"
parameter (see further) is irrelevant.
This parameter should not be checked at the same time as "Direct RTP Accept".
Direct RTP Timeout (default 30 seconds): after a link is established, if no data is received
within this time period, the device "releases" the link (i.e. stops sending its own RTP stream)
and comes back to the idle state (Direct RTP Accept is unchanged).
Multicast Mode: if the selected mode is Multicast, the transmission is unidirectional. Select
with this menu if the codec must be sender of a multicast stream, or rather receiver of such
stream.
Multicast Control Port: this port number (UDP) is used for sending control packets
accompanying the multicast stream. Default value is 6000.
Multicast Audio Port: this port number (UDP) is used for transporting the multicast audio
stream. Default value is 6001.
Note: this setting is not related to the RTP Port settings valid for RTP/SIP or Direct RTP.
Multicast TTL: TTL value applicable to the RTP multicast audio stream. Default: 254.
62

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aeta Scoopy plus S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aeta Scoopy plus S in de taal/talen: Engels als bijlage per email.

De handleiding is 5.56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info