782361
61
Verklein
Vergroot
Pagina terug
1/136
Pagina verder
SCOOPY+ S - User Manual
55
Notes:
Default Protocol: this is the protocol used by default for setting an outgoing call. You can find
here the three possible AoIP session types: SIP (unicast), Direct RTP (unicast), or Multicast. SIP
is the standard choice, "Direct RTP" is a mode without signaling, used for instance for
compatibility with devices that do not support SIP.
STUN Mode: enable or disable STUN. In this way you can disable STUN without erasing the
STUN server address.
STUN Server: enter the address of the STUN server, either in numeric form or with a symbolic
name. This kind of server allows Scoopy+ S to discover its public IP address when it accesses the
Internet through a router with NAT. You can use AETA’s server: stun.aeta-audio.com.
SIP Registration: enable or disable the registration on a SIP registrar server. The following
menus SIP xxx are used to enter the parameters of the account (or the accounts) on this
server, when using such service. These parameters should be provided by the administrator of
the SIP server. With this SIP Registration parameter, you can disable the registration and
hence stop using a SIP server, without having to erase account parameters; these stay ready for
later use.
SIP Accept calls: when this box is checked, the codec accepts incoming SIP calls (regardless
whether the codec is registered or not on a SIP server). If it is not checked, incoming SIP calls
are rejected, with a "busy" indication.
SIP User: enter the user ID as provided with the account. This field corresponds to a number
that a remote party can call to initiate a link with the codec when it is registered on the server.
If this field is left empty, the unit does not register on the SIP server.
SIP Display Name: this (optional) parameter may be displayed by the remote agent during a
link; you can enter any text you wish. If this field is left empty, the actual value is the SIP URI of
the unit.
SIP Registrar: URL of the SIP server, in case one is used. You can also enter a numeric IP
address.
SIP Auth User: enter here the authentication ID as provided with the account. If this field is
left empty, the actual parameter is the same as the SIP User field, which is appropriate in most
cases.
SIP Auth Password: password provided with the SIP account.
SIP Outbound Proxy: IP address or domain name of a proxy server through which SIP
transactions and audio streams are relayed. This parameter is optional, to be filled only is such
server is used in the organization.
Note : contrary to the SIP registration data, this parameter is active even if "SIP Registration"
is disabled.
Keepalive Interval: whenever necessary, the codec performs transactions to "keep alive" a
translation through a NAT router. This setting defines the maximum time left between two
transactions with the SIP server. It should be set on a value lower than the NAT translation time
out of the router.
Min. Regist. Period : sets the interval between two re-registrations on the SIP server. Actually
the server always imposes a maximum period; therefore this setting is optionally used to make
the registration renewal more frequent, if its value is lower than the time set by the SIP server.
SIP port: the default port for SIP signaling is 5060 (UDP), you can enter a different value here.
Note: this port number is valid for the SCOOPY+ S itself, not for the server. For the server side, if a
non-standard port is used, e.g. 5070, the "SIP Registrar" field must specify the port after a
colon like in "mySIPserver:5070".
61

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aeta Scoopy plus S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aeta Scoopy plus S in de taal/talen: Engels als bijlage per email.

De handleiding is 5.56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info