74
Installation
Take utmost care when handling your appliance so as not to
cause any damages to the cooling unit with consequent
possible fluid leakages.
During normal operation, the condenser and compressor at the back
of the appliance heat up considerably. Always ensure that there is
adequate ventilation as a failure to do this will result in component
failure and possible food loss. See installation instructions.
Important: if the supply cord is damaged, it must be replaced by a
special cord or assembly available from the manufacturer or its service
agent.
Positioning
Unpack the cabinet and check that it is in good condition and free of
any transport damage.
The appliance must not be located close to radiators or gas cookers.
Avoid prolonged exposure of the appliance to direct sunlight.
For safety reasons, minimum ventilation must be as shown in Fig.
Attention: keep ventilation openings clear of obstruction.
It is necessary that the niche is provided with a conduct of venti-
lation having the following dimensions:
Depth: 50 mm
Width: 540 mm
