9
Alarm setting
The Memodayplanner has an alarm setting for every light (every
quarter of an hour) throughout the day and night.
The alarm is presented by a blinking light (unless disabled) and a
sound for 15 seconds. All alarms are repeated every day.
This is what you do:
To enter the programming mode push and hold the ALARM
button for 2 seconds. All lights on the Memodayplanner, except
for those alarm is already set, will now be off.
The marker starts on the first light (7 am) when entering the
alarm-setting mode. When the marker is placed on a time
where an alarm is set, it will flash rapidly. If no alarm is set, it
will flash slowly. Pushing the ALARM button alternates between
alarm on and off. The digital clock is always on in programming
mode.
Step to the next alarm point by pushing the TIME button. By
holding the TIME button for more than 1 second, the marker will
step downwards in a quick pace.
Leave the alarm setting mode by pressing the ALARM button
for 2 seconds or do nothing for 1 minute (automatic timeout).
How to stop an alarm
An alarm will sound for 15 seconds on the Memodayplanner. It can
be stopped in three different ways.
Automatic. Wait for 15 seconds and the alarm will automatically
stop.
Connect a switch (Jelly Bean or equivalent) to the switch input
on the back of the Memodayplanner shown on picture 2.
Push the ALARM button on the bottom of the Memodayplanner.
