272 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
ISDN-20: Outgoing call to <Number> subaddress <x> rejected because the local inter-
face is still in use to <Number> subaddress <x>.
indicates that this interface is already used for a different ISDN
connection. If both numbers displayed are equal, check the configura-
tion of Local System ID and Remote System ID.
ISDN-21: Outgoing call to <Number> subaddress <x> rejected because the "Call Status"
is set to "Disabled".
indicates that you set the Call Status parameter in the "ISDN Call
Destination Configuration" to Disabled. Thus, outgoing calls to this
call destination are not allowed over the interface. If you want to
allow outgoing calls to this destination, you have to change the Call
Status and set it to Enabled.
ISDN-22: Outgoing call to <Number> subaddress <x> rejected because "Outbound Call
Processing" is set to "Disabled".
Since the interface cannot process outgoing calls, the call was rejected.
ISDN-23: Incoming call from <Number> subaddress <x> rejected because "Call Accept-
ance" is set to "Only Registered Numbers: CLI" or "...: CLI and Caller-Specified" and this
number (CLI) is not or not properly configured to be accepted.
indicates that the CLI number delivered over the D channel by the
remote site is not configured or not configured properly in the Call
Acceptance Database.
ISDN-24: Call to <Number> subaddress <x> rejected because the PPP LCP negotiation
failed.
indicates that the router was not able to negotiate the PPP LCP with a
remote site and therefore the call was rejected.
ISDN-25: Starvation timeout expired.
indicates that the remote peer of a connection is not answering.
ISDN-26: Calculated self-learning timeout <Period>.
shows the calculated selflearning timeout when
- you set up a physical connection and the selflearning timeout has
been calculated for the first time.
Meldunge.pm6 27.05.97, 21:06272