810499
30
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
30
3.13 TECHNICAL SPECIFICATION OF THE REGULATOR
Power supply 230V + 10%, 50Hz
Input (not including the ventilator and pumps) < 4VA
Range of measuring the boiler temperature –9 – 109 °C+ 1 °C
Range of measuring the flue gas temperature –30–500 °C+ 1 °C
Max. input of devices connected to the regulator 2A/230V
CAUTION: not to get injured by the electrical current, do not remove the cover of device
before disconnecting it from electricity mains!
4 TECHNICAL DESCRIPTION OF THE ATTACK DPX LAMBDA
4.1 REGULATION OF BURNING
The boiler output is regulated according to the flue gas temperature by the air inlets to the
particular oxygen value. The flue gas temperature for burning down is adjusted. If there is a lot of
fuel (totally full feeding chamber) and the boiler temperature achieves 90 °C (overheating), the
flue gas fan is stopped, flap for primary air is closed and flap for secondary air is open for 25 %.
When the boiler temperature decreases to less than 88.5 °C, the flap for secondary air is for 30
seconds open for 100 % (chimney cleaning) and the primary air flap is regulated according to the
requirement for the flue gas temperature.
Automatic boiler stop: After the fuel burns out, the boiler can be stopped automatically or by
setting the flue gas temperature (TAG) or by a setting the value for oxygen (optional function).
Boiler stop by setting the flue gas temperature: When the fuel burns out and the flue gas
temperature decreases to less than 25 % of the adjusted value, the boiler stops after 15 minutes.
This is recommended only when the big or wet wood logs are being used.
Stop by the oxygen value: If the boiler works for more than 45 minutes and the oxygen value
exceeds 14 % for more than 15 minutes, then the boiler stops. This should be a standard function,
when the boiler cooling by chimney is limited. Ignition with remaining coal is easier and there is
less smoke by heating up.
When the boiler stops, the flue gas fan is stopped, the primary air flap is closed, the secondary air
flap remains open for 25 % until the flue gas temperature decreases below 100 °C.
Automatic restart after the power shortage: After the power shortage, the secondary air flap is
open for 100°%for 30 seconds to let the chimney clean.
Overheating (boiler temperature above 90 °C):The secondary air flap remains open for at least
25 %.
After turning the boiler off (automatically or manually):The primary air flap V1 is closed (0°%),
the flue gas temperature is above 100 °C, the secondary air flap remains open for at least 25 %
and function of the automatic operation is inactive.
4.2 IGNITING AND REFILLING THE FUEL
Basic instructions:
Check the pressure (and level of water) in the heating system before igniting.
The fuel has to be prepared in the boiler.
Ignite the fuel (see the prescriptions for boiler operation) and the rest of fuel in the
feeding chamber
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ATTACK DPX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ATTACK DPX in de taal/talen: Engels als bijlage per email.

De handleiding is 11.03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van ATTACK DPX

ATTACK DPX Aanvulling / aanpassing - Deutsch - 21 pagina's

ATTACK DPX Gebruiksaanwijzing - Deutsch - 48 pagina's

ATTACK DPX Aanvulling / aanpassing - English - 21 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info