810499
28
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
28
[A 99] Temperature of boiler overheating – defines the value of boiler temperature to activate
the alarm of the boiler overheating.
[Fd60]Duration of boiler stop by ignition and fuel shortage – this parameter defines the
maximum time between starting the controller by the START button and achieving the
controller´s operating mode (reaching the flue gas temperature of [
c
90]). If the temperature of
[
c
90] is not reached during the heating up, the fan is stopped and the alarm FUEL (fuel shortage)
is displayed.
[Fb30]Duration of boiler stop by flue shortage and burn-down– the fuel amount test is
activated in the operating mode, when the flue gas temperature decreases under the parameter
[
c
90] or (if the flue gas sensor is not connected) when the boiler temperature decreases under
the adjusted parameter [L 45]. If the temperature does not exceed the necessary limit during this
period, the controller displays FUEL alarm.
[Ar 0] The control of the additional output-regulator is equipped with an additional
multifunctional output compatible with the options listed below (it is necessary to use the
additional UM-1 module for this purpose):
[Ar 0] parameter – indicates start of the automatic boiler (e.g. gas or pellet boiler). When
the controller is started and the boiler generates heat, the automatic boiler is stopped.
Operation of the automatic boiler is blocked by the controller in the operating mode. The
automatic boiler is started by controller, when the fuel is burned down in the boiler and
the FUEL alarm is displayed.
[Ar 1] parameter – indicates that the additional multifunctional output will be used for
error messages like boiler sensor failure, overheating or fuel shortage.
[
c
240]Adjusted flue gas temperature – the controller will struggle to reach and to keep this
value. The flue gas temperature sensor is turned off, if this parameter is set to „- -“.
[
c
h5]Hysteresis of flue gas temperature – defines the difference for which must the flue gas
temperature decrease to increase the fan rotations.
[
c
t 5]Time constant of stabilization the flue gas temperature – defines the period of
adjusting the fan rotations during stabilization of the flue gas temperature. If the flue gas
temperature exceeds the value given by the parameter [
c
240], the controller starts to decrease
the fan rotations gradually, until the flue gas temperature decreases to the adjusted value. If the
flue gas temperature decreases to the value of flue gas temperature hysteresis, the controller
starts to increase the fan rotations gradually.
[
c
F10]Blower speed jump while stabilizing exhaust gas temperature – defines the change of
rotations to achieve the adjusted flue gas temperature.
[
c
90]Flue gas temperature by fuel shortage – the message „FUEL“ for fuel shortage is
displayed after the flue gas temperature decreases under this value.
3.8 TESTING THE REGULATOR OUTPUTS
It is possible to make a check to test the correct functionality of the regulator and devices
connected. The correct function of fan is tested by selecting the [outΠ] on display and holding
the „OK“ button. Test of the circuit pump is done by selecting the [outP]. Select the [outu] to
start the additional output and [outr] for multifunctional additional output.
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ATTACK DPX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ATTACK DPX in de taal/talen: Engels als bijlage per email.

De handleiding is 11.03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van ATTACK DPX

ATTACK DPX Aanvulling / aanpassing - Deutsch - 21 pagina's

ATTACK DPX Gebruiksaanwijzing - Deutsch - 48 pagina's

ATTACK DPX Aanvulling / aanpassing - English - 21 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info