EN English
1.5.5 Servicing intervals
:$ ! :
Checking engine oil level yes per the engine operating instructions yes
Engine air filter cleaning checked every 10 hours yes
Washing - 2x yes
Removing dirt and mowed growth debris - after every mowing yes
Blade sharpening - as needed yes
Blade inspection and storage yes immediate replacement upon damage yes
Checking that the cutting disc is tightened yes - yes
Checking tightening of screwed connections yes every 5 hours yes
Lubrication checking the condition
Table 6 Table 6
V-belts check - every 20 hours yes
Table 7: Servicing intervals
1.5.6 Troubleshooting
A @
The cutting disc is not rotating The engine has not started Start the engine
The disk drive clutch lever is not pressed Press the lever
Insufficient belt tension Adjust the tension pulley
Torn belt Replace the belt
The belt has come off Re-mount the belt
Other defect Visit a service centre
The machine is not moving The engine has not started Start the engine
The travel clutch lever is not pressed Press the lever
Insufficient belt tension Adjust both the tension pulleys
Torn belt Replace the belt
The belt has come off Re-mount the belt
Other defect Visit a service centre
The engine will not start The petrol tank is empty Add petrol
The petrol supply line is closed Open the petrol supply line
Other defect Visit a service facility
The brake does not brake There is no axial clearance in the bowden cable, the cable is
stretched
Adjust the brake
The brake key is not loose Lubricate
Brake lining is worn - brake cannot be adjusted Visit a service facility
The machine travel will not stop Broken travel pulley spring Replace with a new one
The inner Bowden cable is stiff; bent Bowden cable Lubricate or replace the Bowden cable
The tension pulley does not return back to its position Lubricate
The cutting disc will not stop The tension pulley does not return back to its position Lubricate
The control levers do not return
back
The inner Bowden cable is stiff; bent Bowden cable Lubricate or replace the Bowden cable
Broken return spring Replace with a new one
Other defect Visit a service facility
Other defect Visit a service facility
Table 8: Troubleshooting
14
