801481
5
Verklein
Vergroot
Pagina terug
1/25
Pagina verder
ENGLISH
UNO G8 Series | User manual
8
9
User manual | UNO G8 Series
Series
1 ANTENNA
It allows the transmission of the
signal.
2 MULTI-FUNCTION DISPLAY
This LCD features a number of
controls and indicators, such as the
group and channel number, icons of
MUTE and lock, and the 4-segment
battery status indicator.
NOTE: the backlight automatically
turns off after a short while.
3 ON/OFF - MUTE
Press this button for 2” to turn on or
off the beltpack transmitter.
Press it briefly to turn ON/OFF the
MUTE function.
4 ASC/LOW BATT
Green LED steadily lit: transmitter on.
Green LED flashing: channel synchronization, ASC in progress.
Red LED steadily lit: MUTE function activated.
Red LED flashing: low battery.
5 IR WINDOW
It allows the synchronization of the channel (frequency) with the receiver.
After pressing the receiver ASC button, place the bottom of the beltpack transmitter
close to the IR window of UNO G8R receiver and wait for the selected channel to stop
flashing on the handheld display. After few moments the synchronization process
ends, and the RF signal level indicator will show the presence of signal.
6 SELECT
Press this button to select functions, and to set receiver parameters values.
7 BATTERIES COMPARTMENT
To replace the batteries, lightly press on the sides of the cover and lift forward.
Take out the old batteries, and insert two new batteries (respecting the compartment
icons) then close the lid. Remove the batteries from the receiver when not in use for
extended periods.
3 | SYSTEM SETUP
To achieve the best reception, please place the receiver at least 1 m
high and put the antennas vertically upwards. Avoid placing the receiver
close to metal objects or digital control devices (CD players, computers,
console, and so on). The receiver and transmitter must have a direct
“visual contact”.
3.1 | RECEIVER SETUP
LCD main window shows indicators of audio (AF) and radio-reception
(RF) levels, followed by the indicators of Squelch (SQL), VOLUME, GROUP,
CHANNEL, ANTENNA DIVERSITY, SYNC and the lock icon, when it’s active
To proceed with the adjustments, please use SET and up/down buttons.
GROUP SELECTION
Press the SET button until when “GROUP” appears in the display. Use the
up and down buttons to select the desired group of frequency, then press
again SET to scroll following parameters and to conrm the choice.
2.3 | BELTPACK TRANSMITTER - UNO G8B
12 63 98 41
5
7
8 MINI XLR-M INPUT
Connect to this input the provided HS-03 headset or the signal from
other sound sources.
9 GAIN SELECTOR
There are three different gain settings:
Mic: for supplied headset microphone and other microphones
0 dB: low output level instruments
-10dB: high output level instruments
WEARING THE BELTPACK
RECEIVER:
Clip the receiver to a belt or to
the shoulder strap of your guitar.
For better fastening reliability it’s
preferable to secure it as shown
in the gure, then fasten it in a
way that the belt is tight from
the clip.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ANT Uno G8 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ANT Uno G8 in de taal/talen: Duits, Engels, Italiaans als bijlage per email.

De handleiding is 3.23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info