215686
29
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
29
3M
Digital Media System 700 Series
© 3M 2007. All Rights Reserved.
ENGLISH
Troubleshooting
Troubleshooting (continued)
Indicator Lamps
ATTENTION • When the interior portion has become overheated, for safety purposes, the power source is
automatically turned off, and the indicator lamps may also be turned off. In such a case, press the “•” (power
OFF) side of the main power switch and wait at least 45 minutes. After the unit has sufficiently cooled down,
please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again.
Lighting and flashing of the power indicator, the lamp indicator, and the temp indicator have the meanings as
described in the table below. Please respond in accordance with the instructions within the table. If the same
indication is displayed after the treatment, or if an indication other than the following is displayed, please contact
your dealer or service company.
What Flashing Indicator Lamps Mean
Power indicator
Lamp
indicator
Temp.
indicator Description
Lighting in orange Turned off Turned off The unit is in a standby state. Please refer to the
"Power ON/OFF" section of this manual.
Flashing in green Turned off Turned off The unit is warming up. Please wait.
Lighting in green Turned off Turned off The unit is in an ON state. Ordinary operations may
be performed.
Flashing in orange Turned off Turned off The unit is cooling down. Please wait.
Blinking in red The unit is cooling down. A certain error has been
detected. Wait until the power indicator has finished
flashing, and then perform the proper response
measure using the item descriptions below as
reference.
Lighting or
blinking in red
Lighting in
red
Turned off The projector lamp has not been properly fixed
(attached), the projector lamp does not light, and/or
there is a possibility that the interior portion has
become heated. Turn the power OFF and wait at least
20 minutes. After the unit has sufficiently cooled
down, please make confirmation of the following
items, and then turn the power ON again. If the
same indication is displayed, please change the lamp.
• Is there blockage of the air passage aperture?
• Is the air filter is dirty?
• Does the peripheral temperature exceed 35˚C?
Lighting or
blinking in red
Blinking in
red
Turned off The lamp cover has not been properly fixed
(attached). Turn the power OFF and wait at least 45
minutes. After the unit has sufficiently cooled down,
please make confirmation of the attachment state of
the lamp and lamp cover, and then turn the power ON
again.
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw 3m dms 700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van 3m dms 700 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info