215686
28
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
28
3M
Digital Media System 700 Series
© 3M 2007. All Rights Reserved.
ENGLISH
Troubleshooting
Troubleshooting
Error Messages
When the unit’s power is ON, messages such as those shown below may be displayed. When any such message
is displayed on the screen, please respond as described below. If the same message is displayed after the
treatment, or if a message other than the following appears, please contact your dealer or service company.
Message Description
CHANGE THE LAMP AFTER
REPLACING LAMP, RESET THE
LAMP TIMER.(*1)
Lamp usage time is approaching 2000 hours. (*2)Preparation of a
new lamp and an early lamp change is recommended. After you have
changed the lamp, please be sure to reset the lamp timer.
CHANGE THE LAMP AFTER
REPLACING LAMP, RESET THE
LAMP TIMER.(*1) THE POWER
WILL TURN OFF AFTER ** hr.
(*1)
Lamp usage time is approaching 2000 hours. (*2)A lamp change within
** hours is recommended. When lamp usage reaches 2000 hours, the
power will automatically be turned OFF. Please change the lamp by
referring to the "Maintenance" section of this manual. After you have
changed the lamp, please be sure to reset the lamp timer.
NO INPUT IS DETECTED ON *** There is no input signal. Please confirm the signal input connection, and
the status of the signal source.
SYNC IS OUT OF RANGE ON
***FH *****kHz ***FV**Hz
The horizontal or vertical wavelength of the inputted signal is outside
of the response parameters of this unit. Please confirm the specs for this
unit or the signal source specs.
CHECK THE AIR FLOW The internal portion temperature is rising. Please turn the power OFF,
and allow the unit to cool down at least 20 minutes. After having
confirmed the following items, please turn the power ON again. Please
turn the power ON again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35˚C?
NOTE
(*1) • Although this message will automatically disappear after 3 minutes, it will reappear every time the power
is turned ON.
(*2) • Lamps have a finite product life. Lamps are characterized by the fact that, after long hours of usage, a
lamp will no longer light up, or the lamp will break or burst. This unit is equipped with an automatic shut-down
function, such that the power will automatically be turned OFF when lamp usage time has reached 2,000 hours.
Please be aware, however, that among lamp types, there are major differences in product lifetimes; a lamp may
thus fail to light even prior to the functioning of the automatic shut-down function of this unit.
28
© 3M 2006. All Rights Reserved.
ENGLISH
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw 3m dms 700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van 3m dms 700 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info