607184
11
Verklein
Vergroot
Pagina terug
1/70
Pagina verder
Chapter 1 Introduction
WRE2206 User’s Guide
11
The following table describes the LEDs and the WPS button.
1.4 The WPS Button
The WPS button can be used to begin WiFi Protected Setup (WPS), reboot the WRE2206 while
keeping it’s configuration or reboot the WRE2206 to factory default configuration.
Table 1 Front Panel LEDs and WPS Button
LED STATUS DESCRIPTION
Signal Strength 3 LED On The signal strength is 50-100%.
2 LED On The signal strength is 25-50%.
1 LED On The signal strength is <25%.
The WRE2206 is in the process of starting up.
Off No signal detected, disconnected or the LED is turned off in the firmware.
Number of
Clients Indicator
1 LED On The number of wireless clients connecting to the WRE2206 is greater than or
equal to ten.
2 LED On The number of wireless clients connecting to the WRE2206 is greater than or
equal to five, but less than ten.
3 LED On The number of wireless clients connecting to the WRE2206 is greater than or
equal to one, but less than five.
The WRE2206 is in the process of starting up.
Off The wireless LAN is not ready.
The number of wireless clients connecting to the WRE2206 is zero.
WPS On This remains on for 5 minutes after a successful WPS connection has been
established.
Blinking
Slowly
The WRE2206 is waiting for another WPS device to connect.
The WRE2206 is in the process of starting up, rebooting or resetting.
Blinking
Rapidly
The WRE2206 fails to connect to a router or AP using WPS.
Off There is no WPS connection established or a WPS connection has been
established for more than five minutes, or the LED is turned off in the
firmware.
Table 2 WPS Button Functions
ACTION RESULT
Push once or hold for
less than 5 seconds
The WRE2206 begins connecting to an AP via WPS. See Section 5.3 on
page 29.
Push twice The WRE2206 begins connecting to a wireless client via WPS. See Section
5.2 on page 26.
Hold for 5 to 10 seconds The WRE2206 keeps its configuration and reboots.
Hold for more than 10
seconds
The WRE2206 resets its configuration to factory defaults and reboots. See
Section 2.3 on page 14.
Push three times Push three times to turn off the WPS LED. After turning off the LED, the
WRE2206 disconnects the connection to a wireless client via WPS and
returns to the normal state.
The physical WPS button has priority over the WPS button in the Web
Configurator.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ZyXEL WRE2206 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ZyXEL WRE2206 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van ZyXEL WRE2206

ZyXEL WRE2206 Snelstart handleiding - Alle talen - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info