Contenuto della confezione
Cenni generali
Il PoE12-HP è un iniettore di aliment azione a una porta, progettato
per essere utilizzato in reti Ethern et 10/100/1000 BaseT . El PoE
inyecta corriente DC a través de los cables trenzados no usados de
un cable estándar CA T 5 de 8 contactos. Esto aumenta la flexibilidad
en el posicionamiento de un dispositivo con corriente sobre Ethernet
(PoE) eliminando la necesidad de una fuen te de alimentación
cercana.
Caratteristiche principali
• Conforme agli standard IEEE802.3at e IEEE 802.3af.
• Una porta RJ-45, porta PoE 10/100/1000 Mbps.
• Consente di alimentare in modo costante un dispositivo PoE.
• Rileva automaticamente se il dispositivo collegato è abilitato a PoE
al fine di evitare di inviare corrente ad un dispositivo non-PoE.
Collegamento del PoE12-HP
Effettuare i collegamenti del PoE12-HP nel modo seguente.
1. La porta DA T A non trasmette elettricità. Ut ilizzare un cavo
Ethernet per collegare la port a DA TA del PoE12-HP alla porta
LAN di un dispositivo Ethernet (come ad esempio uno switch
Ethernet).
2. La porta PoE/DA T A invia elettricità e dati Ethernet al dispositivo
abilitato PoE. Utilizzare un cavo Ethernet passante dirit to per
collegare la porta PoE/DA T A al dispositivo abilitato PoE.
La lunghezza massima del cavo Ethernet e 100 m.
• Una unità PoE12-HP • Una Guida dell'utente • Accessori per il
montaggio a p arete
• Un cavo di
alimentazione
• Una scheda di garanzia
1
3
DA TA
PoE /D ATA
Dispositivo
PoE
Dispositivo Ethernet
1
2
3. Utilizzare il cavo di alimentazione in dotazione per c ollegare la
presa di alimen tazione ad una sorge nte di alimentazione (presa a
muro o ciabatta elettrica).
•I l L E D PWR diventa di colore verde quando il PoE12-HP è
alimentato.
LED
Nella tabella seguent e sono descritti i LED presenti sul PoE12-HP.
Montaggio a parete
Attenersi alla procedura seguente per fissare il PoE12-HP alla
paret e.
1. Fissare le due viti fornite a corre do con il PoE12-HP nella parete,
a una distanza di 106mm. Usare viti con testa da 6 a 8mm (0,24" -
0,31"). Non avvitare complet amente le viti nella parete, ma
lasciare un piccolo sp azio tra la testa della vite e il muro .
2. Lo spazio deve essere abba stanza grande da consentire alle test e
delle viti di scorrere nelle appo site fessure e ai cavi di
connessione di scorrere lungo la parte posteriore del PoE 12-HP.
Assicurarsi che le viti siano saldamente fissate alla p arete e che
siano abbastanza robuste per sostenere il peso de l PoE12-HP
con i cavi di collegamento.
3. Allineare i fori presso la parte po steriore di PoE12-HP con le viti
sulla parete. Appendere il PoE12 -HP sulle viti.
Risoluzione dei problemi
Il LED PWR è spento e/o non viene fornita aliment azione al
dispositivo abilitato PoE.
• Controllare per verificare che il cavo di alimentazione sia collegato
correttamente al PoE 12- HP e ad una adeguata sorgente di
alimentazione. Assicurarsi che la sorgente di alimentazione sia
attiva e funzioni correttamente.
• Fare riferimento alla sezione Collegamento del P oE1 2- HP.
Controllare che i cavi Ethernet siano collegati correttamente e che
venga usato il tipo corretto di cavo Ethernet. Se il problema persiste,
contattare il proprio distributore locale.
LED Colore Stato Descrizione
PoE V erde Lampeg
giante
Il PoE12-HP sta rilevando il dispositivo PoE.
Acceso È fornita alimentazione PoE.
PWR V erde A cces o Il sistema è acceso.
S pent o Il sistema è spento o ha un guasto.
È preferibile montare il PoE12-HP a
elettrica dal lato superiore.
106mm
parete in senso verticale, con la presa
Guida dell'utente
PoE12-HP
Iniettore PoE 802.3at
V ersi one 1.00
Edizione 1, 4/201 1
IT ALIANO
:
PoE12-HP ,
Ethernet 10/ 100/1000 BaseT .
5-
. PoE12-HP
, PoE,
.
• IEEE802.3at IEEE 802.3af.
• 10/100/1000 Mbps RJ-45
PoE.
• PoE.
•
PoE
, .
PoE12-HP
PoE12-HP .
1.
DA TA
. Ethernet
PoE12-HP
DA TA
LAN
( ) Ethernet ( , Ethernet ).
2.
PoE/DA TA
, PoE.
"" Ethernet, ,
PoE,
PoE/DA TA
.
• PoE12-HP •
•
• •
1
3
DA TA
PoE /D ATA
PoE
Ethernet
1
2
Ethernet 100 .
3.
( ).
• PWR PoE1 2-H P
.
PoE12-HP.
PoE12-HP .
1.
, PoE12-HP,
106 . 6
~ 8 (0.24" ~ 0.31"). ;
.
2. ,
PoE12-HP.
PoE12-HP
.
3. PoE12-HP
. PoE12-HP .
!
PWR
/
, PoE.
•
PoE1 2- HP
. .
• . PoE12-HP.
Ethernet
Ethernet. ,
ZyXEL
.
PoE PoE12-HP PoE.
PoE .
PWR
(
)
.
.
PoE12-HP
106
.
PoE12-HP
802.3at PoE
1.00
1, 4/201 1
PoE12-HP ਢԫጟക墅ሽᕴ (power injector)Δ റჸ 10/100/1000
BaseT Ԭ֜ጻሁૠࠌشۖૠΖ PoE12-HP ຘመآࠌشመऱᑑᄷ 8
൷ᆬ CA T 5 ীᠨᒵࣹԵऴੌሽΖຍױ༼Ԭ֜ጻሁࠎሽ (PoE) ᇘᆜ
ऱࡳۯᐘࢤΔլᏁᔢ༉ॵ२ऱሽᄭΖ
• ฤٽ IEEE802.3at א֗ IEEE 802.3af Ζ
• ԫଡ֭ག 10/100/1000 Mbps ႚᙁຒ৫ፖ PoE( Ԭ֜ጻሁࠎሽ ) פ౨
ऱ RJ-45 കΖ
• ᒔঅ PoE ᇘᆜሽᄭࠎᚨլၴឰΖ
• ۞೯ೠྒྷຑ൷ऱᇘᆜਢܡ֭ག PoEΔᝩ܍ಬሽॺ PoE ᇘᆜΖ
PoE12-HP
PoE12-HP ຑ൷ֱڤڕՀΖ
1. DAT A കլᄎႚᙁሽԺΖࠌشԬ֜ጻሁᒵല PoE12-HP ऱ DAT A ക
ຑ۟Ԭ֜ጻሁᇘᆜऱ LAN( ࠏڕԬ֜ጻሁٌངᕴ )Ζ
2. PoE /DAT A കലሽԺࡉԬ֜ጻሁႚಬࠩ PoE ᇘᆜΖࠌشԫኙԫԬ֜
ጻሁᒵല PoE/DAT A കຑ൷ࠩ PoE ᇘᆜΖ
100m
3. ࠌشᙟॵऱሽᄭᒵലሽᄭ༺ᑒຑ൷ࠩሽᄭ ( ᛥ૿༺ஆࢨ༺ஆิ )Ζ
• ᅝ PoE12-HP ൷گࠩሽᄭழΔ PWR LED ਐقᗉᄎॽದጸۥΖ
• ԫ PoE12-HP • ԫءࠌش֫ם • ᕻٙ
• ԫයሽᄭᒵ • ԫ്অࡐ
1
3
DA TA
PoE /D ATA
PoE ᇘᆜ
Ԭ֜ጻሁᇘᆜ
1
2
LED
אՀ।ᎅࣔ PoE12-HP Ղऱ LED ਐقᗉΖ.
ࠉᅃאՀޡᨏല PoE12-HP ࡐࡳڇᛥ૿ՂΖ
1. ലࠟឍ PoE12-HP ᙟॵऱᝅඝԵᛥփΔא 106 mm ၏ᠦሶၲΖᓮ
ࠌشᝅᙰऴஉڇ 6 mm ~ 8 mm (0.24" ~ 0.31") հၴऱᝅΖլ
ނᝅ٤ຝඝԵᛥխΔᝅᙰፖᛥ૿հၴႊఎԫ՛़ᎼΖ
2. ڼ़Ꮌؘႊߩאᨃᝅᙰ࣋ၞᝅᑒΔࠀᨃຑ൷ᨱᒵױൕ PoE12-
HP હ૿ࢮנΖ
PoE12-HP
3. ࠌ PoE12-HP હ૿ऱ֞ኙᏘᛥ૿ՂऱᝅΖല PoE12-HP ڇᝅ
ՂΖ
PWR LED ਐقᗉዽᄰ֗ЯࢨሽԺآႚಬࠩ PoE ᇘᆜΖ
• ᛀီሽᄭᒵਢܡᒔኔຑ൷ࠩ PoE12-HP א֗ሽԺࠐᄭਢܡᔞᅝΖᒔ
ᎁሽᄭբၲඔሎ܂إൄΖ
• ᓮᔹຑ
PoE12-HP ԫᆏΖᛀԬ֜ጻሁᒵਢܡຑ൷إᒔא֗ਢ
ܡࠌشإᒔऱԬ֜ጻሁᒵᣊীΖڕ࣠սڶംᠲ ΔᓮᅝچᆖᔭΖ
LED
PoE
ጸۥ ೂᡩ PoE12-HP إڇೠྒྷ PoE ᇘᆜ
Ζ
ၲඔ ࠎᚨ PoE ሽᄭΖ
PWR
ጸۥ ၲඔ ߓอբၲඔ
Ζ
ᣂຨ ߓอբᣂຨࢨਚᎽΖ
PoE12-HP ᚨিऴᕻ Δ
ࠀࠌሽᄭ༺ᑒཛՂ
Ζ
106mm
PoE12-HP
802.3at PoE
墅ሽᕴ
1.00 ठ
201 1 ڣ 4 ִॣठ
Copyright 2011 ZyXEL Communications Corporation
Product Specifications
Safety Warnings
• Do NOT use this product near water , for example, in a w et basement or near a s wimming pool.
• Do NOT expose your device to dampness, dust or co rrosive liquids.
• Do NOT store things on the device.
• Do NOT install, use, or service this device du ring a thunderstorm. There is a remote risk of
electric shock from lightning.
• Connect ONL Y suitable accessories to the dev ice.
• Do NOT open the device or unit. Opening or removing cov ers can expose you to dangerous high
voltage points or other risks. ONL Y qualified service personnel should service or disassemble
this device. Please con tact your vendor for furth er information.
• Place connecting cables carefully so that no one will step on them or s tumble over them.
• Always disconnect all cables from this device before ser vicing or disassembling.
• Use ONL Y an appropriate power adaptor or cord for your device. Connec t it to the right supply
voltage (for example, 1 10V AC in North America or 230V AC in Europe ).
• Do NOT allow anything to rest on the power a daptor or cord and do NOT place the p roduct
where anyone can walk on the power adaptor or cord.
• Do NOT use the device if the power adapto r or cord is damaged as it might cause electrocution.
• If the power adaptor or cord is damaged, r emove it from the device and the power source .
• Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a new one.
• Do not use the device out side, and make sure all the co nnections are indoors. The re is a remote
risk of electric shock fr om lightning.
• Do NOT obstruct the device ventilation slot s, as insufficient airflow may harm your device.
• Make sure that the cable system is groun ded so as to provide some protection again st voltage
surges.
• Make sure to connect the cables to the correct ports.
• Y our product is marked with this symbol, whic h is known as the WEEE mark. WEEE
stands for W aste Electronics and Elect rical Equipment. It means that used elect rical
and electronic product s should not be mixed with general waste. Used elec trical
and electronic equipment should be t reated separately .
Copyright
Copyright © 201 1 by ZyXEL Communicatio ns Corporation.
The contents of this publicatio n may not be reproduced in any part or a s a whole,
transcribed, stored in a retrieval system, t ranslated into any language, or transmitte d in any
form or by any mean s, electronic, mechanical, magn etic, optical, chemical, photocopying,
manual, or otherwi se, without the prior wr itten permission of ZyXEL Com munications
Corporation.
Published by ZyXEL C ommunications Corpor ation. All right s reserved.
Disclaimer
ZyXEL does not assume any liability arising out of the a pplication or use of any products, or
software described herein. Neither does it convey any license under its patent right s nor the
patent right s of others. ZyXEL further r eserves the right to make chang es in any products
described herein without no tice. This publication is subj ect to change without notice.
Certifications
Federal Communications Commission (FCC) Interference Statement
The device complies with Part 15 of FCC rules. Operation is subject to the followin g two
conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause
undesired opera tions.
This device has been te sted and found to comply wit h the limits for a Cl ass B digital device
pursuant to Part 1 5 of the FCC Rules. These li mits are designed to provide reasonable
protection against harmful interference in a residential installation. This device ge nerates,
uses, and can radi ate radio frequ ency energy, and if not installed and us ed in accordance
with the instructions, may cause harmful interf erence to radio communic ations. However ,
there is no guaran tee that interference w ill not occur in a par ticular installation.
If this device does cause harmful inte rference to radio/television reception, wh ich can be
determined by turning the device off and on, th e user is encouraged to try to correct the
interference by one or more of the followin g measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between t he equipment an d the receiver.
3.
Connect the equipment into an outlet on a circuit different from that to whi ch the receiver is connected.
4. Consult the dealer o r an experienced radio/ TV technician for help.
FCC Caution: Any changes or modifica tions not expressly approved by the party responsible
for compliance could void the use r's authority to operate this equipmen t.
CE Mark Warning:
This is a class B prod uct. In a domestic en vironment this pr oduct may cause radi o
interference in w hich case the user may be required to take ad equate measures.
Notices
Changes or modifications not exp ressly approved by the pa rty responsible for compliance
could void the user's author ity to operate the equipment.
Viewing Certifications
Go to http://www .zyxel.com
.
Compatibility • IEEE802.3 10BASE-T
• IEEE802.3u 100BASE-TX
• IEEE802.3ab 1000BASE- T
• IEEE802.3af
• IEEE802.3at
Ports • One DA TA port for connecting to the passive hub or switch
• One
PoE/DAT A
port for connec ting to the Po E-enabled devi ce
LEDs 1 PoE (green), 1 PWR (green)
Power Input: 1 100~240V , 50~60Hz
Power Rating 100~240V AC 50/60Hz 1.5A max.
Power Consumpt ion 42.1W
Weig ht & Dimensions 396g, 155 (W) * 74 (D) * 36 (H) mm
Operating Environ ment T emperature: 0 ~ 50
o
C
Humidity: 10 to 95% (non- condensing)
Stor age Environment T emperature: -40 ~ 70
o
C
EMI and Safety EN 60950-1, CSA international, FCC Part15 (Class B), CE
EMC (Class B), RoHS Level A
Select your product on t he ZyXEL home page to g o to that product's p age.
Select the certification you wish to view from this page.
ZyXEL Limited Warr anty
ZyXEL warrants to t he original end user (p urchaser) that this product is free from any defects
in materials or wo rkmanship for a period of up to two years from t he date of purchase. Dur ing
the warranty peri od, and upon proof of pu rchase, should the produ ct have indications of
failure due to faul ty workmanship and/or mater ials, ZyXEL will, at it s discretion, repair or
replace the defective pro ducts or component s without charge for either p arts or labor , and to
whatever extent it shall de em necessary to restore the p roduct or components to proper
operating condition. Any replacemen t will consist of a new or re-manufactured functionally
equivalent product of equal or higher value, and will be so lely at the discretion of ZyXEL.
This warranty shall not apply if the product h as been modified, misuse d, tampered with,
damaged by an act of God, or subjected to abnormal working conditio ns.
Note
Repair or repl acement, as provided under this warranty , is the exclusive remedy of the
purchaser. This warranty is in lieu of all other warranties, express or implied, includin g any
implied warranty of merchantability or fitness for a particular use or purp ose. ZyXEL shall in
no event be held liable f or indirect or consequential da mages of any kind to the purcha ser.
T o obtain the services of this warrant y, co ntact your vendor . Y ou may also refer to the
warranty policy for the region in which you bought the device at http://www .zyxel.com/web/
support_warranty_ info.php.
Registration
Register your produc t online to receive e-mai l notices of firmware upgrade s and information
at www.zyxe l.com for global products, or at www .us.zyxel.com for North American products.
ENGLISH DEUTSCH
Green Product Declaration
RoHS Directive 2002/95/EC
Green Product Declaration
RoHS Directive 2002/95/EC
WEEE Directive 2002/96/EC
(WEEE: Waste Electrical and El ectronic
Equipment)
2008/34/EC
WEEE Directive 2002/96/EC
(WEEE: Waste Electrical and Electronic
Equipmen t)
2008/34/EC
Declaration Signature:
Name/Title: Raymond Huang /
Quality & Customer Service
Division Assistant VP
Date (yyyy/mm/dd): 2011/1/24
Unterschrift des Erklärenden:
Name/Titel: Raymond Huang /
Quality & Customer Serv ice
Division Ass istant VP
Datum (JJJJ/MM/TT): 2011/1/24
ESPAÑOL FRANÇAIS
Declaración de Producto Ecológico
Directiva RoHS 2002/95/EC
Déclaration de Produit Green
Directive RoHS 2002/95/EC
Directiva REEE 2002/96/EC
(REEE : Residuos de Eq uipos Eléctricos y
Electrónicos)
2008/34/EC
Directive DEEE 2002/96/E C
(DEEE : Déchets des Equipemen ts
Electriques et Electroniques )
2008/34/EC
Firma de declaración :
Nombre/Título: Raymond Huang
/ Quality & Cust omer Service
Division Assistant VP
Fecha (aaaa/mm/dd): 2011/1/24
Signature de la déclarat ion :
Nom/Titre : Raymond Huang /
Quality & Customer S ervice
Division Assistant VP
Date (aaaa/mm/jj) : 2011/1/24
ITALIANO NEDERLANDS
Dichiarazione Green Product
Direttiva RoHS 2002/95/CE
Productmilieuverklaring
RoHS-richtlijn 2002/95/EC
Direttiva RAEE 2002/96/CE
(RAEE: Rifiuti di Apparecchiatur e Elettriche
ed Elettroniche)
2008/34/EC
AEEA-richtlijn 2002/96/E C
(AEEA: Afgedankte Elektr ische en
Elektronische Apparaten)
2008/34/EC
Firma dichiarazione:
Nome/titolo: Raymond Huang /
Quality & Customer Service
Division Assistant VP
Data (aaaa/mm/gg): 2011/1/24
Verklaringshandtekening:
Naam/titel: Raymond Huang /
Quality & Custo mer Service
Division Assistant VP
Datum(jjjj/mm/dd): 2011/1/24
SVENSKA
Miljödeklaration
RoHS Direktiv 2002/95/EC
WEEE Direktiv 2002/96/EC
(WEEE: hantering av elektr iskt och
elektroniskt avfall)
2008/34/EC
Deklaration undertecknad av:
Namn/Titel: Raymond Huang /
Quality & Customer Service
Division Assistant VP
Datum (åååå/mm/dd): 2011/1/24