666166

Zoom iQ6 Handleiding

1
Verklein
Vergroot
Pagina terug
1/1
Pagina verder
Usage and Safety Precautions
OPERATION MANUAL
SAFETY PRECAUTIONS
In this manual, symbols are used to highlight warnings and cautions that you must read to prevent accidents.
The meanings of these symbols are as follows:
Warning
Something that could cause serious injury or death.
Caution
Something that could cause injury or damage to the equipment.
Other symbols
Required (mandatory) actions
Prohibited actions
Warning
Warning
Alterations
Never open the case or attempt to modify the product.
Warning
Precautions
Product handling
Do not drop, bump or apply excessive force to the unit.
Be careful not to allow foreign objects or liquids to enter the unit.
Operating environment
Do not use in extremely high or low temperatures.
Do not use near heaters, stoves and other heat sources.
Do not use in very high humidity or near splashing water.
Do not use in places with excessive vibrations.
Do not use in places with excessive dust or sand.
Precaution when using the connectors
Before moving the device, always disconnect all the connectors.
Usage Precautions
Interference with other electrical equipment
In consideration of safety, the
has been designed to minimize the emission of electromagnetic radia-
tion from the device and to minimize external electromagnetic interference. However, equipment that is
very susceptible to interference or that emits powerful electromagnetic waves could result in
interference
if placed nearby. If this occurs, place the
and the other device farther apart.
With any type of electronic device that uses digital control, including the , electromagnetic interference
could cause malfunction, corrupt or destroy data and result in other unexpected trouble. Always use caution.
Cleaning Use a soft cloth to clean the panels of the unit if they become dirty. If necessary, use a damp cloth
that has been wrung out well. Never use abrasive cleansers, wax or solvents, including alcohol, benzene and
paint thinner.
Malfunction If a malfunction or something unexpected occurs, disconnect the and connection cables
as soon as possible. Contact the store where you bought the unit or ZOOM service with the following informa-
tion: product model, serial number and specific symptoms of failure or malfunction, along with your name,
address and telephone number.
Copyrights
• All other trademarks, product names and company names mentioned in this documentation are the property
of their respective owners.
Note: All trademarks and registered trademarks mentioned in this manual are for identification purposes only
and are not intended to infringe on the copyrights of their respective owners.
• Recording for any purpose other than personal use from copyrighted sources, including CDs, records, tapes,
live performances, video works and broadcasts, without permission of the copyright holder is prohibited by law.
Zoom Corporation will not assume any responsibility related to infringements of copyrights.
”Made for iPod”, ”Made for iPhone”, and ”Made for iPad” mean that an electronic accessory has been designed
to connect specifically to iPod, iPhone, or iPad, respectively and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the operation of this device or its compliance with
safety
and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect
wireless performance.
FCC regulation warning (for U.S.A.)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer
-
ence to radio or television reception, which can be determined by turn-ing the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Declaration of Conformity
This product compiles with the requirements of EMC Directive 2004/108/EC and Low
Voltage Directiv
e 2006/95/EC and ErP Directive 2009/125/EC and RoHS Directive 2011/65/EU
Adjusting the stereo width
Adjusting the recording level
2. Connect headphones, for example, to the stereo mini jack on the .
Use the app to adjust the volume of the headphones or other device
connected to the stereo mini jack.
The volume level set using the app is saved in the and will be
applied when using the with other applications.
1. Turn both individual mics to change the recording angle.
90°: Record with a stereo width of 90°.
120°: Record with a stereo width of 120°.
1. Turn the dial to adjust the recording level.
Check the level indicator, and adjust the recording level so that the middle LED lights.
NOTE
• No sound is output from the connected device speakers when the is connected. If you want to
listen to audio using the speakers, disconnect the from the device when you are done recording.
• Connect the and the iOS device completely. Incomplete connection could cause
malfunction or damage.
• When you are not using the , disconnect it from the iOS device and put it away. If you
use the iOS device while the is still connected, damage could occur if excessive force
is applied to the connector.
HINT
• If the input level is too high and causes distortion (−0.25 dB or higher), the red LED will light.
If this occurs, use the MIC GAIN knob to reduce the recording level.
• For recording and playback procedures, see the instructions for the app that you are using.
X/Y stereo mic: This is an X/Y format stereo mic.
You can set the recording angle to 90° or 120° by
turning the individual mics. (See “Adjusting the
stereo width.”)
Stereo mini jack: Connect headphones to
monitor recording and playback. This can also be
used as a line output jack.
MIC GAIN knob: Use to adjust the recording
level manually. (See “Adjusting the recording
level.”)
Level indicator: The red LED lights dimly when
connection with the device is normal. The LEDs
also light according to the level of the input
signal.
(Red)
Higher than
−42 dB
Higher than
−12 dB
Higher than
–0.25 dB
Lightning connector: Connect to the Lightning
connector of the iOS device.
Case adjuster: Remove this if the case of the
device prevents the Lightning connector from
connecting completely.
1. Connect the to the device with the
lighting connector.
When the connected device is providing power to the ,
the red LED lights dimly.
The becomes ready for use when
or another app that can use it is started.
NOTE
•
When adjusting the dial or mic angle, hold the and the connected device together to prevent them from
becoming disconnected. Use of excessive force could cause disconnection and even damage the connector.
NOTE
•
The lightning connector does not have a front or back, but if you connect the to the device upside down
compared to the illustration above, the left and right stereo channels will be reversed.
* The left and right stereo settings can be reversed in app. This setting
is stored in the itself.
HINT
If an authentication error or other problem occurs, the red LED will blink dimly.
Microphone Type Unidirectional
X/Y stereo mic (90°/120°)
Maximum input sound pressure 130dBspl
Input gain +11 - +51dB
Audio quality 44.1kHz/16bit, 48kHz/16bit
Power Powered by the connected device
Connector Lightning connector
Stereo mini jack (combined headphone/line level output)
Dimensions 61.1 (W) x 30.6 (D) x 53.1 (H) mm
Weight 28.8g
Compatible devices
iPhone 5, iPhone 5s, iPhone 5c, iPhone 6, iPhone 6 Plus, iPod touch (5th generation),
iPad (4th generation), iPad Air, iPad Air 2, iPad mini, iPad mini 2, iPad mini 3
Supported operating
systems
iOS 6.0 or newer
Specifications
Part Names
Connecting with the Device
Using the Microphone
ZOOM CORPORATION
4-4-3 Surugadai, Kanda, Chiyoda-ku, Tokyo 101-0062 Japan
http://www.zoom.co.jp
© 2014 ZOOM CORPORATION
Copying or reproduction of this document in whole or in part without permission is prohibited.
Thank you very much for purchasing the ZOOM .
The
has the following features.
• High quality mic that connects with iPhones, iPods and iPads
This stereo microphone can be connected to an iPhone (5 or later), iPod touch (5th
generation), iPad (4th generation), iPad Air or iPad mini and used with an application that
supports mic input to record high-quality audio.
Note: In this manual, we refer to all of these devices as “the connected device” or “the iOS device.”
• X/Y mic format allows adjustment of the recording angle
The X/Y mic format uses two crossed unidirectional mics and allows you to record audio
sources in a targeted field as a stereo image that has depth. You can set the recording
angle to 90° or 120° by turning the mics.
• High-performance app for use with the mic
Download the free application from the App Store and use it with the to, for
example, set the recording format, edit audio files and apply various effects.
• Audio monitoring without latency (only when using the ZOOM
app)
Using latency-free direct monitoring, the audio input through the can be output
directly from the stereo mini jack without passing through the connected iOS device.
• Recording level can be adjusted directly from the
The dial on the can be used to adjust the recording level.
• Usable even with devices in cases
By removing the included case adjuster, you can connect this mic to a device even when
it is in a case.
Stereo mini jack Lightning connector
X/Y stereo mic
MIC GAIN knob
Level indicator Case adjuster
120°
90°
Recording level
Low High
• Remove the case adjuster if
the case of the device prevents
the Lightning connector from
connecting completely.
• Some cases might prevent
connection even when the
case adjuster is removed.
If the connected device sends or receives data wirelessly while recording with the ,
noise could occur in the recording. Using the phone function of the iPhone will also cause
recording to stop. When using the , put the connected device into Airplane Mode.
• iPad, iPhone, iPod and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. iPad Air,
iPad mini, and Lightning are trademarks of Apple Inc.

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zoom iQ6 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zoom iQ6 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info