533776
46
Verklein
Vergroot
Pagina terug
1/224
Pagina verder
Reference [Recorder]
ZOOM MRS-1608
46
When pressed, a key lights up, and the corresponding
input is active.
4.
While the instruments are played, adjust
the [INPUT] controls to obtain a suitable
input sensitivity level.
When using the GUITAR/BASS INPUT jacks 1/2,
perform the adjustment with the [GUITAR/BASS
INPUT] control 1/2 on the front panel.
5.
To use an insert effect, press the [INPUT
SOURCE] key in the effect section, and
press the [ON/OFF] key for the input to
which you want to apply the effect.
The respective [ON/OFF] key lights up orange, and the
insert effect is applied. When 8x COMP EQ is selected as
algorithm for the insert effect, all channels can be
processed by the effect. Otherwise, two selected channels
can be effect-processed.
HINT
In the default condition of a project, a patch suitable for
guitar/bass playing is selected as insert effect. If necessary,
select a different patch (
p. 139).
6.
While the instruments are played, use the
[REC LEVEL] control to adjust the
recording level.
Set the recording level as high as possible, but avoid
settings that cause the [CLIP] indicator to light. The
current signal level can be checked with the level meters
IN1 – IN8.
7.
Repeatedly press the status keys for the
tracks (1 – 8) to be recorded so that the
keys are lit in red.
Up to eight status keys can be activated simultaneously.
When a track is switched to the recording standby
condition, the signal from the input mixer will be sent to
the corresponding recording track.
If the [ON/OFF] key for a track is ON but the corresponding
status key is lit green (or is off), the respective input will not
be recorded.
8.
Move to the start point of the recorder, and
start recording.
When recording is finished, stop the recorder.
9.
To cancel the 8-track recording condition,
press the [8TRACK RECORDING] key.
The key goes out.
This function lets you set marks at any recorder position,
and return to the mark using a simple operation. Up to
100 marks can be set.
HINT
It is also possible to switch mixer settings or effect setting
groups (scenes) at a marked position (
p. 84).
When creating an audio CD, marks can be used to provide
index information. This will allow the CD player to access
specific points within tracks (
p. 155).
Setting a mark
Here’s how to assign a mark at the desired location in a
song.
1.
Locate the point to which you want to
assign a mark.
HINT
•A mark can be assigned either during playback or when
stopped.
•You can use the scrub function (
p. 38) to locate the
position with high precision.
2.
Press the [MARK] key in the control
section.
A mark will be assigned to the current location. The mark
number will appear in the MARKER field of the counter.
The MARKER field shows the number of the mark at the
current position or the closest preceding mark. When the
current position matches the mark, a marker symbol
appears to the right of the mark number.
Marker function
Mark number
Marker symbol
307
307
2
2
0 01
01
1608E.book 46 ページ 2004年4月19日 月曜日 午前10時44分
46

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zoom MRS-1608 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zoom MRS-1608 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Zoom MRS-1608

Zoom MRS-1608 Gebruiksaanwijzing - Deutsch - 224 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info