533776
40
Verklein
Vergroot
Pagina terug
1/224
Pagina verder
Reference [Recorder]
ZOOM MRS-1608
40
Using auto punch-in/out
Auto punch-in/out is a function that lets you specify
beforehand the region to be re-recorded. Punch-in will occur
automatically when you reach the starting location (In
point), and punch-out will occur automatically when you
reach the ending location (Out point). This is convenient
when you cannot operate the MRS-1608 because you are
playing the instrument yourself, or when very fast playback/
record switching is required.
In order to perform auto punch-in/out, you must first
specify the In point (the point where the recorder
switches from playback to record) and Out point (the
point where the recorder switches from record to
playback), and then perform the recording operation.
1.
Raise the fader of the track on which you
want to perform punch-in/out to a suitable
position.
2.
Use the [ON/OFF] key to select the input,
and then play your instrument connected to
the INPUT jack and use the [INPUT] control
and [REC LEVEL] control to adjust the
recording level.
3.
Locate the point at which you want to
punch-in, and press the [AUTO PUNCH IN/
OUT] key.
The key flashes. This sets the “In point” at which recording
will begin.
4.
Locate the point at which you want to
punch-out, and press the [AUTO PUNCH
IN/OUT] key once more.
The key changes from flashing to solidly lit. This sets the
“Out point” at which recording will end.
HINT
To specify the in/out points precisely, it is convenient to use
the scrub function (
p. 38) to find the locations and assign
a mark (
p. 46) beforehand at the desired locations.
5.
Use the Locate function to go to a spot
before the In point.
6.
Repeatedly press the status key for the
track on which you want to perform punch-
in/out, until the key flashes red.
NOTE
If the current location is between the In point and Out point,
the status key (and the REC [
O
] key if during recording) will
be lit red. In this case, use the locate function once again to
go to a point that is earlier than the In point.
7.
To rehearse the auto punch-in/out process,
press the PLAY [R
] key.
The recorder will begin playing. When you reach the In
point, the track on which you are punching-in/out will be
muted. When you reach the Out point, muting will be
defeated. (You will always be able to monitor the input
signal during this time.) Performing this action will not
delete or record anything on the track.
When you have finished rehearsing, move again to a
location earlier than the In point.
HINT
To change the positions of the In point or Out point, press the
[AUTO PUNCH IN/OUT] key so that the key goes out, and
then repeat steps 3 – 7.
8.
To actually perform auto punch-in/out, hold
down the REC [
O
] key and press the PLAY
[
R
] key.
The recorder will begin playing. When you reach the In
point, recording will begin automatically (punch-in).
When you reach the Out point, recording will end
automatically, and playback will resume (punch-out).
9.
When you have finished recording, press
the STOP [
P
] key.
10.
To listen to the recorded result, repeatedly
press the status key for the track on which
you recorded, until the key is lit green. Then
move to a location earlier than the In point,
and press the PLAY [
R
] key.
To re-do the punch-in/punch-out recording, repeat steps
5 – 9.
11.
When you are satisfied with the recording,
press the [AUTO PUNCH IN/OUT] key so
that the key goes out.
The auto punch-in/out function is turned off, and the In
point and Out point settings are cleared.
In point Out point
Track
PlaybackPlayback Recording
1608E.book 40 ページ 2004年4月19日 月曜日 午前10時44分
40

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zoom MRS-1608 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zoom MRS-1608 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Zoom MRS-1608

Zoom MRS-1608 Gebruiksaanwijzing - Deutsch - 224 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info