MRS-1044CD/MRS-1044 ver2.0
31
Troubleshooting
■
MRS-1044 series does not recognize
SCSI device
• Check whether SIB-01 is correctly installed.
• Check whether MRS-1044 series system has been
updated to version 2.0
• Check whether SCSI cable is correctly connected,
and whether SCSI device is powered.
• Check whether SCSI ID setting is appropriate.
• Check whether terminator is installed in the last
device, or internal terminator has been set to ON. In
rare cases, removing the terminator may improve
operation stability.
■
Audio CDs created with the MRS-1044
series cannot be played on an ordinary
CD player
• Check whether the disc was finalized.
• Check whether the CD player is an old model.
On some old CD players, audio CDs created with CD-R
discs will not play properly, even if the disc was
finalized.
Audio CDs created with CD-RW discs will not play on
normal CD players.
■
Audio data cannot be written to the CD-
R/CD-RW media
• Check whether the disc has already been finalized.
■
Backup cannot be performed
• Check whether the CD-R/CD-RW disc already
contains other audio data.
• Check whether the hard disk has enough capacity.
■
A backup spanning multiple volumes
cannot be restored
• Was the correct disc inserted?
When the backup was performed by project, insert disc
number 1. When the entire hard disk was backed up,
insert the disc which contains the first project to be
restored.
■
While UIB-01 is being used, access
indicator remains lit.
• When the UIB-01 is installed in the MRS-1044CD
model and the unit is in USB mode, the disc access
indicator may remain constantly lit. This does not
consist a problem, and you can use the USB mode
normally.
■
When trying to execute a command, one
of the following messages appears.
[MO drive, ZIP drive, or hard disk related]
NO DIR
•••••••••••••••••••••
Directory does not exist.
INSERT DISKxxx
••••••••
Insert the disk with the number
xxx.
FULL
••••••••••••••••••••••••
Hard disk does not have
sufficient space.
NO DATA
•••••••••••••••••••
No applicable data exists.
SAME DIR
•••••••••••••••••
Directory with the same name
already exists.
[CD-R/RW drive related]
FULL
••••••••••••••••••••••••
CD-R/CD-RW disc does not
have sufficient space.
INSERT DISCxxx
•••••••
Insert the disc with the number
xxx.
NO AUDIO
••••••••••••••••
Disc other than audio CD is
inserted in CD-R/RW drive.
NO DATA
•••••••••••••••••••
No applicable data exists.
NO DISC
•••••••••••••••••••
No disc inserted in CD-R/RW
drive.
NotBLANK
••••••••••••••••
CD-R/CD-RW disc is not
blank.
NOT CD-R
••••••••••••••••
Disc inserted in CD-R/RW
drive is not a CD-R/CD-RW
disc.
[MRS-1044 related]
HDD FULL
•••••••••••••••••
Internal hard disk of MRS-
1044 is full.
PRJ FULL
•••••••••••••••••
No more projects can be
created on internal hard disk of
MRS-1044.
Troubleshooting
If there are problems during MRS-1044 series or SCSI device operation, check the following points first.
