Handleiding Zoom G3n (pagina 41 van 52) (Engels)

666184

Verklein

Vergroot

Pagina terug

1/52

Pagina verder

Thank you very much for purchasing the ZOOM .

Please read this manual carefully to learn about all the functions of the

so that you will be able to use it fully.

Keep this manual in a convenient place for reference when necessary.

Usage and safety precautions …………… 2

Introduction ………………………………… 3

Terms used in this manual ………………… 3

Part names ………………………………… 4

Turning the power on ……………………… 6

Display information ………………………… 7

Adjusting effects …………………………… 8

Using patches ……………………………… 16

Adjusting the master level ………………… 22

Changing various settings ………………… 23

Using the tuner ……………………………… 28

Using rhythms ……………………………… 34

Using the looper …………………………… 36

Using the pedal ……………………………… 41

Using the tap tempo function …………… 44

Restoring default settings and patches …… 46

Updating the rmware ……………………… 47

Troubleshooting …………………………… 49

Rhythm List ………………………………… 50

Specications ……………………………… 51

OPERATION MANUAL

Contents

Copying or reproduction of this Operation Manual in part or in whole without permission is prohibited.

Usage and safety precautions

In this manual, symbols are used to highlight warnings

and cautions that you must read to prevent accidents. The

meanings of these symbols are as follows:

Interference with other electrical equipment

In consideration of safety, the has been

designed to minimize the emission of electromagnetic radiation

from the device and to minimize external electromagnetic

interference. However, equipment that is very susceptible to

interference or that emits powerful electromagnetic waves could

result in interference if placed nearby. If this occurs, place the

and the other device farther apart.

With any type of electronic device that uses digital control,

including the

, electromagnetic interference

could cause malfunction, corrupt or destroy data and result in

other unexpected trouble. Always use caution.

Cleaning

Use a soft cloth to clean the panels of the unit if they become

dirty. If necessary, use a damp cloth that has been wrung out

well. Never use abrasive cleansers, wax or solvents, including

alcohol, benzene and paint thinner.

Malfunction

If the unit becomes broken or malfunctions, immediately

disconnect the AC adapter, turn the power OFF and disconnect

other cables. Contact the store where you bought the unit or

ZOOM service with the following information: product model,

serial number and specific symptoms of failure or malfunction,

along with your name, address and telephone number.

Copyrights

• Windows

, Windows 7

Windows 8.1

and Windows

10 are

trademarks or registered trademarks of Microsoft

• Macintosh

and Mac OS

are trademarks or registered

trademarks of Apple Inc.

• Allothertrademarks, productnamesand companynames

mentioned in this documentation are the property of their

respective owners.

Note: All trademarks and registered trademarks mentioned in this

manual are for identification purposes only and are not intended

to infringe on the copyrights of their respective owners.

Safety Precautions Usage Precautions

Warning

Precautions

Something that could cause serious injury

or death.

Something that could cause injury or

damage to the equipment.

Warning

Caution

Other symbols

Prohibited actions

Required (mandatory) actions

AC adapter handling

When disconnecting the AC adapter from an outlet, always pull the

body of the adapter itself.

During lightning storms or when not using the unit, disconnect the

power plug from the AC outlet.

Alterations

Never open the case or attempt to modify the product.

Operation using an AC adapter

Use only a ZOOM AD-16 AC adapter with this unit.

Do not do anything that could exceed the ratings of outlets and

other electrical wiring equipment.

Product handling

Do not drop, bump or apply excessive force to the unit.

Be careful not to allow foreign objects or liquids to enter the unit.

Operating environment

Do not use in extremely high or low temperatures.

Do not use near heaters, stoves and other heat sources.

Do not use in very high humidity or near splashing water.

Do not use in places with excessive vibrations.

Do not use in places with excessive dust or sand.

Connecting cables with input and output

jacks

Always turn the power OFF for all equipment before connecting any

cables.

Always disconnect all connection cables and the AC adapter before

moving the unit.

Volume

Do not use the product at a loud volume for a long period of time.

Declaration of Conformity

For EU Countries

FCC regulation warning (for U.S.A.)

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•Reorientorrelocatethereceivingantenna.

•Increasetheseparationbetweentheequipmentandreceiver.

•

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

Introduction

More advanced user interface

We have made the stompbox-style user interface developed for our G series even more

advanced. Using the three displays, you can easily check effect parameters and effect

chains.

Detailed emulations of amp and cabinet characteristics

The delivers studio-quality sound with precise emulations of circuit

operations and tube amp characteristics along with cabinets modeled using impulse

responses.

Download new effects and patches

Our free Effects/PatchManagersoftware forWindows andMacOS

allows you to regularly download new effects and patches created by ZOOM. For detailed

information,seetheZOOMwebsite(http://www.zoom.co.jp/downloads/).

Terms used in this manual

Patch

The canstoreupto150patcheswitheffectparametersettingsandON/

OFF states.

Bank

A set of three patches is called a "bank".

Unit

Each "Unit" combines a Display, 4 parameter knobs and a foot switch.

Large effect

An effect that uses multiple units is called a "large effect".

* A printed list of effect parameters is not included with the

Please download a copy from the ZOOM website.

http://www.zoom.co.jp/

Part names

Front panel

Rear panel

Display

Parameter knobs

(In explanations,

these will be

shown like this:

)

TYPE keys

Footswitches FS1–FS3

BANK/SCROLL switches

MENU key

Expression pedal

( only)

Control knob/enter key

Mode switch

DC 9V AC adapter

connector

CONTROL IN jack

( only)

Dedicated AC adapter (AD-16)

POWER switch

Computer

USB portPHONES jack

OUTPUT jacks

AUX IN jack

INPUT jack

Pedal switch

( only)

Headphones

Guitar amp

Monitor speakers

Guitar

Portable music player, etc.

Display

Parameter knobs

(In explanations,

these will be

shown like this:

)

TYPE keys

Footswitches FS1–FS3

BANK/SCROLL switches

MENU key

Expression pedal

( only)

Control knob/enter key

Mode switch

DC 9V AC adapter

connector

CONTROL IN jack

( only)

Dedicated AC adapter (AD-16)

POWER switch

Computer

USB port

PHONES jack

OUTPUT jacks

AUX IN jackINPUT jack

Pedal switch

( only)

Headphones

Guitar amp

Monitor speakers

Guitar

Portable music player, etc.

Part names

Turning the power on

To turn the power on

• Lowertheamplier'svolumealltheway.

• ConnecttheACadapterbeforesettingthePOWERswitchtoON.

• TurnthepowerofyourguitaramplierorPAsystemonandraiseitsvolume.

HINT

The starts up in the mode used when the POWER switch was last turned OFF.

Using the eco setting

When eco mode is ON, the will automatically turn off if it is

not used for 10 hours.

Display information

Display in STOMP mode

InSTOMPmode,youcanturneffectsON/OFFandchangeeffecttypes.

Standard effect

Parameter names

Parameter values

Large effect

Parameter

names

Parameter values

Switching display contents

Press to switch between showing parameters and effect names.

Display in MEMORY mode

In MEMORY mode, you can change patches and banks.

Patch number Patch name

Showing the effects used in a patch

Press to show the effects used in a patch.

When the effects are shown, turn

to scroll through the effects.

Press again to return to the original screen.

Adjusting effects

Press to change to STOMP mode.

Turning effects ON/OFF

• Press .

• ThisturnsthateffectON/OFF.

[OFF] [ON]

NOTE

Some large effects have SOLO or other special functions assigned to .

The parameter function assigned to is shown on the Display with white letters on a dark

background.

Ordinary

ON/OFF

SOLOON/

OFF

Selecting effect types

• Press .

• Thischangestheeffecttype.

NOTE

The allows you to combine up to 7 effects in whatever order you like. If limits on the

processing capabilityor thenumberofunitsusedare exceeded,a "PROCESSOVERFLOW" warningwill

appear and effects will be bypassed. To end bypassing, delete some effects or change their types.

Selecting effect categories

• Whilepressingandholding , press .

• Thecategorynamewillappearandtheeffectwillbechangedtotherst

effect type in the category.

…

HINT

While pressing and holding , press to change effect categories in reverse order.

…

Adjusting effects

Adjusting parameters

• Turn , , and .

HINT

• Parameteradjustmentsaresavedautomatically.

• WhenAUTOSAVEissettoOFF,aparametersavingscreenwillappearwhenyoutrytochangepatches.

(

P19)

NOTE

Set Time, Rate and other effect parameters to musical notes to sync them to the tempo. (

P44)

Scrolling effect displays

• Use and to scroll the screen.

• Press or .

Adjusting effects

• Pressrepeatedlytoscrolltheeffectdisplays.

• Press .

Adding effects

• Press to open the MENU screen.

• Turn to select ADD.

NOTE

If 7 effects are already in use, ADD will not be shown.

• Press to open the ADD screen.

Adjusting effects

• Turn to select where the effect will be added.

• Press to conrm where the effect is added.

• AcablewillbeaddedtotheDisplay.

• Press to select the effect type.

Adjusting effects

Deleting effects

• Press to open the MENU screen.

• Turn to select DELETE.

• Press

to open the DELETE screen.

• Turn to select the effect to delete.

• Press .

• Press to delete the effect.

HINT

Turn to cancel deletion.

Adjusting effects

• Press .

Changing the effect order

• Press to open the MENU screen.

• Turn to select CHAIN.

• Press to open the CHAIN screen.

• Turn to select the effect to swap.

• Press to conrm the effect to swap.

Adjusting effects

• Turn to swap with the next effect in the chain.

• Press .

Using amp effects

The amp effects in the can provide optimal sounds when

combined with cabinet effects.

Change the MIC parameter of the cabinet effect according to the device

connected.

For guitar amp output :

MIC parameter OFF

For output from headphones or

monitor speakers :

MIC parameter ON

Adjusting effects

Press to switch to MEMORY mode.

Selecting patches

■ Switching patches

• Press , or .

• Thischangesthepatch.

NOTE

The selected patch has a white background.

■ Switching banks

• Use and .

• Thischangesthebank.

NOTE

• Pressandhold , to change banks continuously.

• SeeP24forinformationaboutthepreselectfunctionthatenableschangingtobankswithdistantnumbers.

Using patches

Setting independent patch parameters

■ Entering patch setting mode

• Press to open the MENU screen.

• Turn to select PATCH.

• Press to open the PATCH screen.

■ Adjusting patch levels

• Turn toselectLEVEL.

• Press .

• Turn to set the patch level.

Using patches

NOTE

The setting range is 0–120.

• Press to conrm the patch level.

■ Changing patch names

• Turn

to select the character to change.

• Press to conrm the character to change.

• Turn to change the character.

• Press to conrm the changed character.

NOTE

• Thecharactersandsymbolsthatcanbeusedareasfollows.

 !#$%&'()+,-.;=@[]^_`{}~,(space)A–Z,a–z,0–9

• Pressandhold

to change the character type.

Using patches

■ Ending patch setting mode

• Press .

Saving patches

• Press to open the MENU screen.

• Turn toselectSAVE.

• Press toopentheSAVEscreen.

• Turn to select where the patch will be saved.

• Press to conrm where the patch will be saved.

• Turn to select YES.

Using patches

HINT

Select NO to cancel saving the patch.

• Press to save the patch.

Swapping patches

• Press to open the MENU screen.

• Turn to select SWAP.

• Press to open the SWAP screen.

• Turn to select the patch to be swapped.

• Press to conrm the patch to be swapped.

Using patches

• Turn to select YES.

HINT

Select NO to cancel swapping.

• Press to swap the patches.

Using patches

Adjusting the master level

• Press to open the MENU screen.

• Turn toselectM.LVL.

• Press toopentheMASTERLEVELscreen.

• Turn to adjust the master level.

NOTE

The setting range is 0–120.

HINT

You can also turn to adjust the master level in both STOMP and MEMORY modes.

Changing various settings

Change various settings on the SETUP screen.

Opening the SETUP screen

• Press to open the MENU screen.

• Turn to select SETUP.

• Press to open the SETUP screen.

Setting the preselect function

Turn PRESELECT ON to enter standby when the bank is switched, allowing you to

press a foot switch to confirm the patch change.

• OntheSETUPscreen,turn

to select PRESELECT.

• Press .

• Turn tosetPRESELECTtoON/OFF.

• Press to conrm the preselect setting.

Changing various settings

Setting the eco mode

When eco mode is on, the will automatically turn off if not used

for 10 hours.

• OntheSETUPscreen,turn

to select eco.

• Press .

• Turn tosetecotoON/OFF.

• Press to conrm the eco mode setting.

Changing various settings

Setting the auto save function

Enable parameters to be saved automatically.

• OntheSETUPscreen,turn

toselectAUTOSAVE.

• Press .

• Turn tosetAUTOSAVEtoON/OFF.

NOTE

When set to OFF, no patch or effect parameters will be saved automatically.

• Press to conrm the auto save setting.

Note about switching patches

WhenAUTOSAVEisset toOFF, if youtry to switch patches after changinganyparameters, a

message will appear asking to save the parameter changes.

To save changes to parameters before switching patches, select YES. (

P19)

To discard changes to parameters before switching patches, select NO.

Changing various settings

Adjusting the display contrast

• OntheSETUPscreen,turn to select LCD CNTRST.

• Press .

• Turn to select a display to adjust its contrast.

• Press to conrm the display.

• Turn to adjust the contrast.

NOTE

The setting range is 1–13.

• Press to conrm the contrast setting.

Changing various settings

Using the tuner

Activating the tuner

• Pressandhold in STOMP or MEMORY mode.

• Press or .

(Press

)

The BYPASS sound is output when the TUNER is active.

(Press

)

No sound is output when the TUNER is active.

• ThisopenstheTUNERscreen.

28 29

Tuning a guitar

• Playtheopenstringthatyouwanttotuneandadjustitspitch.

Chromatic tuner

The name of the nearest note and the pitch accuracy are shown.

Flat Correct pitch Sharp

Other tuners

The number of the nearest string and the pitch accuracy are shown.

Flat Correct pitch Sharp

Closing the tuner

• Press when the TUNER screen is open.

Using the tuner

Changing the tuner settings

■ Opening the TUNER SETTINGS screen

• Press to open the MENU screen.

• Turn to select TUNER.

• Press to open the TUNER SETTINGS screen.

Using the tuner

■ Changing the standard pitch of the tuner

• OntheTUNERSETTINGSscreen,turn to select CALIBRATION.

• Press .

• Turn to change the standard pitch.

NOTE

The setting range is 435–445 Hz for middle A.

• Press to conrm the standard pitch of the tuner.

HINT

You can also turn the center unit when the TUNER screen is open to change the standard pitch.

Using the tuner

■ Changing the tuner type

• OntheTUNERSETTINGSscreen,turn to select TYPE.

• Press .

• Turn to select the tuner type.

CHROMATIC

Thechromatictunershowsthenearestpitchname(semitone)andhowfartheinputsoundisfrom

that pitch.

Other tuner types

Depending on the selected type, the nearest string name and how far the sound input is from that

pitch are shown. The following tuner types can be selected.

Display Meaning

Stringnumber/Notename

7 6 5 4 3 2 1

GUITAR Standard tuning for guitars, including 7-string guitars B E A D G B E

OPEN A In open A tuning, the open strings make an A chord - E A E A C# E

OPEN D In open D tuning, the open strings make a D chord - D A D F# A D

OPEN E In open E tuning, the open strings make an E chord - E B E G# B E

OPEN G In open G tuning, the open strings make a G chord - D G D G B D

DADGAD This alternate tuning is often used for tapping, etc. - D A D G A D

• Press to conrm the tuner type.

Using the tuner

■ Using at tuning

• OntheTUNERSETTINGSscreen,turn to select FLAT.

• Press .

• Turn to change the at tuning.

NOTE

• Youcandropthetuningbyone(x1),two(x2)orthree(x3)semitones.

• DroptuningisnotpossiblewhentheTYPEissettoCHROMATIC.

• Press to conrm the at tuning setting.

Using the tuner

Using rhythms

Selecting a rhythm

• Press to change to STOMP mode.

• Use to select RHYTHM for the desired unit.

NOTE

One RHYTHM can be selected per patch.

Playing a rhythm

• Press

for the unit using the rhythm effect.

• Therhythmstartsplaying.

HINT

• Duringrhythmplayback,youcanswitchbetweenSTOMPandMEMORYmodes.

• Ifyouchangeapatchduringrhythmplayback,therhythmwillstop.

Stopping a rhythm

• Duringrhythmplayback,press

for the unit using the rhythm.

• Therhythmstops.

Setting rhythms

■ Selecting rhythm patterns

• Turn for the unit using the rhythm.

NOTE

See P50 for information about the patterns.

■ Adjusting the rhythm tempo

• Turn for the unit using the rhythm.

NOTE

• Thesettingrangeis40–250bpm.

• Thistemposettingisusedbyeveryeffect,rhythmsandthelooper.

■ Adjusting the rhythm volume

• Turn for the unit using the rhythm.

NOTE

The setting range is 0–100.

Using rhythms

Using the looper

Selecting the looper

• Press to change to STOMP mode.

• Use to select a LOOPER for the desired unit.

1-unit looper

2-unit looper

NOTE

• Thereare4typesofloopers:1-unitmono,2-unitmono,1-unitstereoand2-unitstereo.

• OneLOOPERcanbeselectedperpatch.

Recording, playing and clearing phrases

■ Recording phrases

• Press

for the rst unit in the LOOPER.

• Thisstartsrecording.

• Recordingstopsandloopplaybackstarts.

If the recording time is set to "MANUAL"

Loop playback will start when you press

again or when the maximum recording time is

reached.

If the recording time is set to a musical note

Loop playback will start when the set recording time is reached.

HINT

• SeeP39forhowtosettheLOOPERrecordingtime.

• Duringphraserecordingandplayback,switchingtoMEMORYmodewillnotinterruptit.

NOTE

• Duringrhythmplayback,recordingwillstartaftertheprecount.

• Changingapatchwillstopphraserecordingandplayback.Moreover,thiswilldeletethephraserecording

data.

• During rhythmplayback,quantizationis enabled so eveniftherecordingending time is notexact,the

loop will automatically be adjusted so that loop playback stays in time.

• ChangingthetempoofaRHYTHMduringloopplaybackwillerasetherecordedphrase.

■ Overdubbing a recorded phrase

• Duringloopplayback,press

for the rst unit in the LOOPER.

■ Stopping loop playback

With 1-unit looper

• Duringloopplayback,press

twice for the unit using the looper.

• Thisstopstheplayback.

Using the looper

With 2-unit looper

• Duringloopplayback,press

for the second unit in the LOOPER.

• Thisstopstheplayback.

■ Deleting phrases

With 1-unit looper

• Whenloopplaybackisstopped,pressandhold

for the unit using

the looper.

• Thisdeletesthephrase.

With 2-unit looper

• Whenloopplaybackisstopped,press

for the second unit in the

LOOPER.

• Thisdeletesthephrase.

Using the looper

Setting the looper

■ Setting the looper recording time

• Turn for the unit using the looper.

NOTE

• ThesettingoptionsincludeMANUALand1–64quarternotes.

• Therecordingtimeforthemonolooperisfrom1.5to80seconds(40secondswhenUNDOisON).

• Therecordingtimeforthestereolooperisfrom1.5to40seconds(20secondswhenUNDOisON).

• Settingsthatwillnottintherecordingtimewillbeadjustedautomatically.

• Changingtherecordingtimewilldeletetherecordeddata.

■ Setting the UNDO function

• Turn fortheunitusingtheloopertosetittoON/OFF.

NOTE

When UNDO is ON, the recording time will become as follows.

• Monolooper:40seconds

• Stereolooper:20seconds

Using the UNDO and REDO functions

If UNDO is ON, you can undo the last overdub. You can also use the REDO function to restore the

phrase that the UNDO function deleted.

With 1-unit looper

To undo an overdub, press

for one second during playback. To restore the deleted phrase, press

for one second again.

With 2-unit looper

To undo an overdub, press

for the rst unit twice during playback. To restore the deleted phrase,

press

twice again.

Using the looper

■ Setting how loop playback stops

• Turn for the unit using the looper.

STOP

Stop playback immediately.

FINISH

Play to the end and then stop.

FADE OUT

Stop after fading out.

■ Adjusting the looper volume

• Turn for the unit using the looper.

NOTE

The setting range is 0–100.

Using the looper

Using the pedal

Using a connected pedal ( only)

■ Setting up the connected pedal

You can set a pedal effect to be assigned to the connected pedal.

• Press

to open the MENU screen.

• Turn to select EX PDL.

• Press to open the EXT PEDAL screen.

• Turn toturntheconnectedpedalON/OFF.

HINT

When EXT PEDAL is ON, you can use a pedal effect.

Zoom G3n Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info