For details on the parameters of each effect module,
please refer to “Effect Types and Parameters” on
page 13.
• Change other parameters in the same way.
Parameter setting changes made in this way are only
temporary. If you return to the Play mode or select a
different patch without storing the new settings first,
the settings will be lost. For details on how to store a
patch, please refer to next section.
Turning Effect Modules On and Off
In the Edit mode, each effect can be turned on and off
independently from others.
• Pressing a pedal corresponding to an effect module
that is currently on (pedal LED and effect module
cursor LED are lit) turns the effect module off.
The LED goes out. Press the pedal again to turn the effect
back on.
The effect module on/off setting can also be stored as
part of a patch.
Compare
During editing, it is possible to temporarily return to the
setting that was active before starting the editing process.
This is called the “compare” function.
• In the Edit mode, press the GROUP key.
The previous value of the parameter where the cursor is
currently located and the indication “CP” appear alternately
on the display.
• Press the GROUP key once more.
The 2020 returns to the Edit mode.
The compare function is useful for example to check
how a certain parameter change affects the overall
sound. When the parameter is selected with the
PARAMETER SELECT keys, the value of that
parameter is shown on the display.
Storing a Patch
If an edited patch (or a patch whose patch level setting was
changed in the Play mode) is not stored, the change will be
lost when another patch is selected. To preserve a setting,
store the patch as described below.
• Press the STORE key in the Play mode or Edit mode.
This activates the store mode, and you can now choose the
bank number and patch number in which you want to store
the patch.
For patches from the preset group, parameters other
than the patch level cannot be stored. Therefore,
even if a patch was chosen from the preset group, the
store destination will automatically become “U”
(user group) if a parameter other than the patch level
was changed. If only the patch level was changed,
the store destination can also be “P” (preset group).
• Use the BANK pedal and pedals 1 - 4 to specify the
bank number and patch number.
If no input is made, the patch will be stored in the original
bank number and patch number.
When a patch is stored, the patch that was previously
stored in that number will be overwritten (erased).
Take care not to erase a patch that you want to keep.
When wishing to restore the factory preset patches,
please refer to the explanation on page 18.
• Press the STORE key again. The patch is stored, and
the 2020 reverts to the Play mode.
If the STORE key has not yet been pressed for the
second time, you can use the EDIT/CANCEL key to
cancel the store process and return to the
immediately preceding mode.
When connecting the FP01 to a CONTROL IN jack,
use the EXP. OUT connector of the FP01.
