As shown in the illustration above, a patch of the 1010
contains parameters for the five types of effect modules
and the patch level settings. In the Edit mode, you can call
up any of these parameters and change them.
1.Select the desired patch in the Play mode (from the
USER group or the PRESET group).
For details on how to select a patch,please refer to page 4.
2.Press the EDIT key.
The 1010 is now in the Edit mode. The flashing module
indicator shows which effect module is selected for
editing, and the flashing parameter indicator shows which
parameter within the module is selected for editing.
3.Pressing the EDIT key once more returns the 1010 to
the Play mode.
In the Edit mode, the following information is shown.
(1) Effect module on/off
The module cursor indicators of effect modules which are
ON in the selected patch are lit.
(2) Parameter type
The type of the parameter currently selected for editing is
indicated by the cross point of the flashing module cursor
indicator and parameter cursor indicator.
(3) Parameter value
The value of the parameter currently selected for editing is
shown on the display.
1.Press the EDIT key to activate the Edit mode.
2.Use the MODULE SELECT key to select the effect
module you wish to edit.
Editing a Patch
Panel display in Edit mode
