Note:
a. Before scheduling, please set the robot time to be the same with real time.
b. The robot will start cleaning at the schedule time of Robot Clock every day.
Use and Operation
Cleaning settings
Press the "CLEAN" button to have Sjaan vacuumed. The different cleaning settings can only be
selected when Sjaan is vacuuming. Press the MODE button on the remote control to select a
cleaning setting. The setting will appear on the LED screen as follows:
Press "MODE" when Sjaan has to perform a specific task.
Nod1: the robot will work on a 1 x 1 meter surface via a zigzag pattern.
Nod2: the robot will work on a surface of 2 x 2 meters via a zigzag pattern.
Nod3: the robot will work on a surface of 3 x 3 meters via a zigzag pattern.
Nod4: the robot will work on a 4 x 4 meter surface via a zigzag pattern.
Use metal strip
The metal strip acts as a virtual wall. For example, place the strip in a doorway and Sjaan will not
enter the space behind the strip.
Gyroscope (2D Mapping)
Sjaan is equipped with a gyroscope. This effectively separates the different spaces instead of
randomly. This ensures a better and faster cleaning result.
Thanks to the Gyroscope, direct manual control, both on the App and with the remote control
supplied, only works when Sjaan is in stand-by mode. Than the Fan is switched off.
