657583
10
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
EN
8
4
6
1
3
5
2
7
6.1 HOSE AND ACCESSORIES FITTING
Insert the hose with its connection into the SLALOM SYSTEM
TM
at the front. (See
Chapter 4.1: Patented Features, Slalom System
TM
).
In order to clean floors, it will be necessary to insert the proper accessories into
the special extension tube (Pict.1) by using the proper fit/release button (Pict. 2)
and then connect to the grip handle by simply pressing.
When the hose is inserted, all 3 orange lights will start blinking. The machine is
now on "STAND BY", ready for use.
The tank lid fasteners have been designed in such a way that, should they be
hit when they are open, they will not be damaged. They might break loose, but
it is very easy to put them back into place, by fitting the forks onto the support
pins (Pict. 3).
For your convenience you will find 2 TUBE-CARRIERS on each side of the device
in which you can insert the extension tubes whenever you need your hands free
for something else (move furniture around, etc.), (Pict. 4).
MAX speed
MED speed
MIN speed
Function
button
Cable winder
button
6.2 PREPARING THE VACUUM FUNCTION
Connect the power cord (Pict.5) by pulling it out from the back of the machine
and inserting it into a mains plug. In order to avoid the power cord getting hot
inside the machine, always pull it out to its complete extension. To rewind, push
the cable winder button (Pict.6) on the upper right side of the machine; do not
let the plug whip around while rewinding.
Upon plugging into the mains, 3 flashing LEDS on the function button (Pict.7)
will come on to signal that the machine is now connected and on standby. Press
the function button again and quickly release, the three flashing LEDS now go
off, and one steady orange LED will come on: the machine is now running on
minimum speed and you can start vacuuming.
If you want to change vacuum power, keep the function button pressed for a
few seconds: 2 steady LEDS will come on, to indicate MEDIUM vacuum power;
or if you keep the function button pressed, the speed will change to MAX and so
on until the button is released at the desired speed.
Reminder! To turn the machine off, give a short push on the same button!
To switch off the motor, press and then quickly release the function button.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zepter PWC-200 - Tuttoluxo 2S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zepter PWC-200 - Tuttoluxo 2S in de taal/talen: Engels als bijlage per email.

De handleiding is 1,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info