Handleiding Zelmer Voyager Twix 01Z014 ST (pagina 36 van 40) (Engels, Pools)

539699

Verklein

Vergroot

Pagina terug

1/40

Pagina verder

SAFETY VALVE

The vacuum cleaner is equipped with safety valve, which is located in dust compartment (bag) chamber. It opens itself, when

the sucking hose or connected accessories are completely blocked or dust bag is full of dust. When the valve is open, you can

hear characteristic uttering sound.

FULL DUST COMPARTMENT INDICATOR

Full bag indicator glowing (red colour), when the nozzle or brush is above the cleaned surface, informs us that it is necessary to

empty dust compartment.

Full bag indicator can activate also in case of blocked sucking hose or one of connected accessories. In such case, remove the

hose from front lid and clean the hose and connected accessories.

DUST COMPARTMENT

This vacuum cleaner is equipped with possibility of applying two alternative dust compartments:

Dust compartment so called ”CYKLON”.

SAFBAG dustbag.

1. „CYKLON” dust compartment assembling and removing:

Switch off the vacuum cleaner and unplug from the mains supply outlet. –

Press the upper lid locking button – „A” and open it upwards „B”.

Remove „CYKLON” dust compartment. –

Leant eh compartment cover locker – „C” and remove the cover „D”.

Empty the compartment from accumulated rubbish. –

ATTENTION! After this activity check HEPA main lter and clean it or Exchange if

necessary – see item: „1. Main inlet lter – exchange.

Insert the compartment cover – ”E”, Press it strong ”F” and press the locker „G”.

ATTENTION! The dust compartment must be closed thoroughly, otherwise the

dust shall get into the vacuum cleaner chamber and the suction power shall

reduce.

Place the empty compartment inside the vacuum cleaner chamber. –

Lock the upper lid of the vacuum cleaner. When the lid is closed properly you will hear charac- –

teristic clicking sound.

2. SAFBAG dust bag assembling and removing

Switch off the vacuum cleaner and unplug from the mains supply outlet. –

Press the upper lid locking button and open it upwards (see item1). –

Remove „CYKLON” dust compartment (see item1). –

Place SAFBAG dust bag cardboard part inside the bag handle, which is an additional accessory, insert –

the cardboard part up to the end inside handle runners „H”. The direction of dust bag assembling is indi-

cated with an arrow on the bag handle.

Place such assembled handle with SAFBAG dust bag in the runners on the front Wall of vacuum cleaner –

chamber „I”.

Place the dust bag inside the chamber carefully not to jam the bag – with upper lid „J”.

Lock the upper lid of the vacuum cleaner. When the lid is closed properly you will hear characteristic clicking sound. –

Close the SAFBAG dust bag lid, to cover the inlet of the full bag and dispose it. –

ATTENTION! Do not vacuum without CYKLON ltration pad or without the dust bag. The vacuum cleaner

is equipped with a blockade, which prevents closing the lid without inserting lter or dust bag.

FILTERS

The vacuum cleaner is equipped with lter system:

HEPA main inlet lter.

Motor protecting lter.

HEPA outlet lter.

1. Main inlet lter - exchange

This lter is a part of „CYKLON” dust compartment. In order to exchange it:

Switch off the vacuum cleaner and unplug from the mains supply outlet. –

Remove and empty „CYKLON” dust compartment. See – „CYKLON” dust compartment assembling and

removing.

Press two hooks of HEPA main lter – „A” (on both sides of the compartment) and remove it „B”.

Clean (blow) the fold of HEPA basic lter. You can also rinse HEPA with running water. –

ATTENTION! Dry the lter thoroughly after rinsing. HEPA main lter should be replaced with a new one always when it is damaged.

SAFBAG

dust bag

„Cyklon” dust

compartment

Bending

line

Cover

Horizontal storage:

insert the brush – nozzle on telescope pipe, –

insert the hook located at the backside of telescope pipe inside the handle socket at the –

backside at vacuum cleaner axis (under full bag indicator).

Vertical storage:

insert the brush – nozzle on telescope pipe, –

insert the hook located at the backside of telescope pipe inside the handle socket at the bot- –

tom of the vacuum cleaner beside front wheel.

Horizontal storage Vertical storage

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Zelmer Voyager Twix 01Z014 ST Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info