114 CM2005-001_v02
CLEANING THE BREWING HEAD AND THE
FILTER HOLDER
The brewing head and the lter holder should be cleaned
●
after each use.
Use warm water with an addition of delicate dishwashing
●
liquid for cleaning.
Do not use aggressive, coarse or alcohol-based cleaning
●
agents.
The lter holder may be cleaned with running water.
●
If you do not use the espresso machine, store the lter
●
holder closed. It will allow you to avoid unnecessary seal
wear.
1
In order to clean the inner elements of the lter holder,
turn the lter, until you nd a cut which lets you remove the
lter.
2
Next remove the silicone pad.
3
You will nd the dispenser underneath the pad, which
now you can easily remove.
Before reassembling the elements, dry them carefully.
●
In order to situate the lter in its holder, the insets must
●
overlap with the incisions on the holder.
DESCALING THE APPLIANCE
Limescale is a mineral residue found on surfaces of all
appliances with the function of water heating. This is why the
espresso machine needs descaling from time to time. We
advise to descale the espresso machine every 4-6 months,
depending on use.
DESCALING AGENTS
Traditionally the following agents are used to descale an
espresso machine:
Vinegar solution
●
Fill the container in the following proportions: 1/3 vinegar, 2/3
water.
Citric acid solution
●
Dissolve a packet of citric acid in half a liter of water.
Dedicated liquids or tablets
●
In case of liquids and tablets act accordingly
to the guidelines provided on the label of
a product.
In order to descale the appliance, please follow the steps
below.
1
Place the container with the desired solution in the
espresso machine.
2
Install the lter holder, without any coffee in it, in the
appliance.
