539683
33
Verklein
Vergroot
Pagina terug
1/38
Pagina verder
39VC1001-001_v01
Technical parameters
The type of the vacuum cleaner and the technical parameters
are indicated on the rating label. Mains protection 16 A. Does
not cause interferences with audio/video devices.
Does not require grounding .
ZELMER vacuum cleaners meet the requirements of the
applicable norms.
The appliance is in conformity with the requirements of the
directives:
Low voltage appliance (LVD) – 2006/95/EC.
Electromagnetic compatibility (EMC) – 2004/108/EC.
Noise level: 83 dB/A.
The appliance was marked by a CE sign on the rating label.
Static electricity
In the process of vacuuming of some surfaces in areas of
low air humidity the device may become electrically charged.
It is a natural phenomenon – it does not damage the device,
and it is not considered to be a fault.
In order to minimize the phenomenon, we recommend you to:
discharge the device by touching metal items in the room
with the pipe,
increase air humidity in the room,
use widely available antistatic agents.
Design
A
1
Fastening for nozzle brush
2
Plug with the cord
3
Cord winder button
4
On/off button and suction power control knob in one
5
Full bag indicator
6
Fastening of the upper cover
7
Handle
8
Bolt – a mechanic controller of suction power
9
Suction hose
10
Telescopic suction pipe
11
Intake lter (HEPA 11)
12
Foam rubber cover
13
SAFBAGtype bag
14
Nozzle brush
15
Small nozzle
16
Crevice nozzle
17
Small brush
18
Parquet brush “BNB”
Is used to clean and polish hard, scratch sensitive surfaces
such as wooden oors, oor panels, parquet, marble,
tiles, etc.
Delicate and soft natural bristles ensure maximum vacuum
effectiveness and protects against scratching the cleaned
surface.
Before rst use
B
Before starting the vacuum cleaner make sure, whether the
SAFBAG is properly installed in the chamber of the vacuum
cleaner, and whether all lters are in place as well.
1
Place the end of the hose in the opening of the vacuum
cleaner, and gently press it. A characteristic “click” signalizes
the hose has been properly installed.
2
Connect the other end of the hose (handle) with the
telescopic suction tube. In order to do so press the locking
device “A” and slide the tube into the hose handle so that
the locking device “A” is blocked in opening “B”.
3
Select the needed length of the telescopic suction pipe
by sliding the slider according to the arrow, and pulling out/in
the pipe.
4
Install a nozzle or a brush on the other end of the suction
pipe.
5
For hard surfaces (wooden oors, plastic oors, ceramic
tiling, etc.) pull out the brush by pressing the switch on the
nozzle brush as it is shown on the picture .
6
Grab the plug of the cord (2), and pull it out of the vacuum
cleaner.
When pulling out the cord pay attention to
the yellow band which marks the end of the
cord.Anyattemptstounwindthecordfurther
(especiallyforcefullypullingonit)mayleadto
damagingit.
7
Put the plug of the cord in an electric socket.
8
Press the on/off switch to start the vacuum cleaner.
9
The vacuum cleaner is equipped with an electronic
controller of suction power, which enables smooth regulation
of suction power of the vacuum cleaner. By turning the knob
(4) clockwise or counterclockwise you may increase or
decrease the suction power.
10
The vacuum cleaner is also equipped with a mechanic
suction power controller (8), which is situated on the hose
handle. You may use it to slightly regulate the suction power
without the need to use the knob (4).
(De)installing the SAFBAG-type bag
C
The vacuum cleaner is equipped with safety
valve located in chamber of dust container
(bag). It opens automatically in case of total
stoppingofsuctionhoseor totalstoppingof
equipmentelementsconnectedthereto,aswell
asincaseofoverllofdustbag.Afteropening
the valve one can hear characteristic “whirr”
soundinsidethevacuumcleaner.
1
The vacuum cleaner is equipped with a full bag indicator
(5). When the indicator light is on during work (a nozzle or
brush is over a cleaned surface), it means the bag needs to be
replaced. The full bag indicator (5) may also be on when the
suction hose or other accessories linked to it are clogged up.
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zelmer Roto VC1001.0 SP bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zelmer Roto VC1001.0 SP in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 3,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info