538897

Zelmer Nerro Plus 13Z016 Handleiding

71
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
71GW13-024_v01
16. Automatic shutdown function
The machine will turn itself off automatically, if it is not used for over an
hour. To turn it on again press the power on/off button (A) – you should
hear a sound signal afterwards.
17. Emptying the drip tray
When the drip tray (8) is lled with water, its
red emptiness gauge (9) will rise above the
drip tray grid (7). Pull out the drip tray (8)
with the grid (7) out of the espresso machine
and pour the water out (Fig. 10). Place the
accessories back in the machine.
15. Making steam (foaming milk)
In order to foam milk you have to use the steam mode. The function of the
steam is twofold. The steam heats up and mixes the milk with air, giving it
a smooth, velvet look. Similarly as in coffee brewing, foaming milk needs
some experience and you will achieve better results in time.
Tip: Remember that coffee is the basis for all coffee-based beverages and
milk is only an addition.
Remark: It is advisable to make coffee rst, then start foaming milk.
The steam mode may be used for heating up beverages.
15.1. Make espresso according to paragraph 11 or paragraph 13.
15.2. Estimate the amount of milk needed on the base of the number of
cups of coffee or the size of a pot for milk.
Tip: ● Remember that the amount of milk increases during
foaming.
Pour in cool milk into a stainless pot, lling it up to 1/3 or 1/2 of ●
its capacity.
Tip: ● Keep the stainless pot with milk in a refrigerator for it to be
cool. Remember not to rinse the pot with hot water before use.
15.3. Press the steam mode select button (E). You will hear a sound
signal. The display panel will indicate informing you that it is
now in steam mode.
15.4. The indicator on the display panel will begin to whirl, signalizing
that the espresso machine is heating up.
15.5. When the indicator stops whirling, you will hear a sound signal
informing you that the machine is ready for use (has reached the
right temperature).
15.6. Rinse the steam/hot water nozzle (10) by placing an other container
apart from the pot with milk and acting according to paragraph
6.2.5. The steam nozzle will be rinsed.
15.7. Place the steam nozzle (10) in the milk pot (Fig. 8) in such a way
that the nozzle is about 1/2 cm below the level of milk and activate
the steam trigger turn the steam control (12) to position , i.e.
turn it counterclockwise, so the sign will cover the casing of
the espresso machine.
Tilt the pot in such a way that the steam nozzle is placed in the ●
pot and gradually lower the pot until the nozzle is below the level
of milk. This will result in foaming milk.
Important: ● Do not allow for steam to go out unevenly, as milk
in such a case will not be foamed appropriately. To avoid such
a situation pick up the pot in such a way that the nozzle is placed
deeper in the milk. Remember that a foam should be ideally light
and soft.
When the milk is heated and foamed, its level will rise. When it ●
happens, lower the pot keeping the end of the nozzle under the
level of milk.
When the foam is done lift the pot in such a way that the nozzle ●
is placed in the middle of milk.
Tip: ● The amount of foam differs depending on the type of
prepared beverage. For example, cappuccino needs more foam
than an espresso-based coffee beverage served with foamed
milk.
Close off steam as soon as milk is heated up to 60–65°C turn the ●
steam control (12) to OFF position, i.e. turn it clockwise, so the
sign OFF will cover the marker on the casing of the espresso
machine.
Tip: ● If you have not got a thermometer, a good way to measure
the temperature is to touch the side of the pot. If the milk is hot
enough, you will not be able to hold your hand for more than
3 seconds..
Important: ● Do not boil the milk up.
Remove the pot. Immediately wipe the steam nozzle ● (10) and
its ending with a clean, wet cloth, as well as rinse it with a small
amount of steam as before the process of milk foaming.
Holding the pot in hand tap it on the table to release air bubbles ●
and then move it in circles till the milk is shiny and there are no
air bubbles visible. This will help to get a uniform consistency of
milk and foam.
15.8. Add the foamed milk to the espresso prepared earlier. Your
cappuccino is now ready.
15.9. To end working with the hot water mode on, press power on/off
button (A). You will hear a sound signal. The indicator will
go off from the display panel, informing that the espresso machine is
back to the coffee brew mode.
CAUTION! If there is not enough water in the water tank (1), the nozzle
(10) will not produce hot water. The indicator will ash on the
display panel and you will hear a repeating sound signal informing
you about the necessity to ll in water. Make sure to turn the water
off turn the steam control (12) to OFF, position, i.e. turn it clockwise,
so the sign OFF will cover the marker on the casing of the espresso
machine. Open the water tank cover (1) and pour in the water. After
replenishing water, the sound signal will stop. To continue with the
hot water mode turn the steam control (12) to position , i.e.
turn it counterclockwise, so the sign will cover the casing of
the espresso machine.
CAUTION! Moving the steam/hot water nozzle (10) is possible only by
means of a special attachment (Fig. 9). The steam/hot water nozzle
(10) is extremely hot.
18. Removing limescale
Limescale is a mineral residue, which forms a natural deposit on all
devices responsible for heating up water. This is why limescale needs
to be removed from the espresso periodically. When a certain amount of
water is used by the machine (this amount depends on its hardness level
set in the machine) the display panel should indicate a ashing . If you
see this highlighted on the control panel, you have to descale the device.
ATTENTION! Descale your coffee maker at least every 3 months. The
damages which are caused by failure to descale the appliance are
not subject to warranty repairs.
Descaling solutions
Traditionally, the following agents are used for removal of scale from coffee
makers:
Citric acid solution ●
Dissolve 2 spoonful (ca. 30 g) of citric acid in 1 l of water.
Specially designated liquids or tablets. ●
Hint: For liquids and tablets, follow the instructions shown on the packaging
of these products.
18.1. Unplug the espresso machine from the power supply.
18.2. Make sure that the espresso machine has cooled off.
18.3. Remove the water tank (1) and the drip tray (8) together with its grid
(7) from the espresso machine (Fig. 11).
Fig. 8 Fig. 9
Fig. 10
… 71 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zelmer Nerro Plus 13Z016 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zelmer Nerro Plus 13Z016 in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 5,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info