539664
42
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
48 2750-001_v04
10
Switch on the vacuum cleaner by pressing the “on/off”
button (7).
11
The vacuum cleaner is equipped with an electronic power
control which allows to gradually adjust the vacuum cleaner
suction power during operation. To adjust the suction power
use the power adjustment buttons (11,9) to increase the
suction power or to decrease the suction power. The
suction power setting is indicated by the appropriate number
of lit diodes.
The vacuum cleaner will by default begin operation at the high
power. 4 diodes will light on the power level indicator (10).
The suction power may be adjusted during operation. The
recommended settings are:
Setting 1 – vacuuming curtains
Setting 2 – vacuuming upholstery
Setting 3 – costeffective power
Setting 4 – vacuuming carpets
Setting 5 – vacuuming hard oors and crevices.
12
Set the desired power value by pressing the power
adjustment buttons , (11,9).
SAFBAG dust bag disassembly/assembly
C
1
The vacuum cleaner is equipped with a dust bag full
indicator (8). When the dust bag full indicator (8) lights
during operation (with the nozzle or the brush lifted above
the cleaned surface) it means that the bag is full and needs
to be replaced. In addition the dust bag full indicator (8) may
activate if the suction hose or the elements attached to the
suction hose are clogged (suction power – level 5).
2
Switch off the vacuum cleaner by pressing the “on/off”
button (7) and unplug the appliance.
3
Press the two side buttons on the end of the hose and
remove the hose end from the inlet opening of the vacuum
cleaner.
4
Release the upper cover fastening (12) and open the cover.
5
Remove the SAFBAG dust bag module (21) from the
vacuum cleaner chamber
6
Grab the dust bag cover, gently bend it towards the
inside and remove the whole dust bag upwards.
7
Insert the plate of the new dust bag in the tracks of the
SAFBAG dust bag module (21) and slide it until stop. The
direction for inserting the dust bag is indicated by the arrow
on the bag.
8
Slide the SAFBAG dust bag module together with the
installed bag in the tracks located on the side of the vacuum
cleaner chamber. Close the cover by pressing it until you
hear a characteristic click – pay attention not to trap the
dust bag.
DonotvacuumwithouttheSAFBAGdustbag
module/the“CYKLON”dustcontainerinstalled
intheappliance.ThelackoftheSAFBAGdust
bag module/the “CYKLON” dust container
preventsfrom locking the upper coverof the
appliance.
ZELMER vacuum cleaners are equipped with SAFBAG dust
bags in the amount indicated in the table. It is recommended
to replace the dust bag if:
a) a)the SAFBAG dust bag /”CYKLON” dust container full
indicator will lit up,
b) the vacuum cleaner operates poorly,
c) the dust bag is full.
Disassembly/assembly of the “CYKLON”
dust container
The vacuum cleaner is equipped with a removable dust
container “CYKLON” in which dirt is accumulated. The dust
container “CYKLON” must be emptied once full.
1
Switch off the vacuum cleaner by pressing the “on/off”
button (7) and unplug the appliance.
2
Press the two side buttons on the end of the hose and
remove the hose end from the inlet opening of the vacuum
cleaner.
3
Release the upper cover fastening (12) and open the
cover.
4
Remove the “CYKLON” dust container from the vacuum
cleaner chamber.
5
Pull aside the fastenings on the “CYKLON” dust container
and open the container. Empty the dirt from the container.
Afterperformingthisactivity,checkthebasic
HEPA12lterandifnecessarycleanorreplace
thelter.
6
Close the cover of the “CYKLON” dust container, rmly
press the fastenings until you hear a characteristic “click”.
The container must be tightly closed.
Otherwise the dust might enter the vacuum
cleanerchamberandthesuctionpowerwillbe
reduced.
7
Insert the empty “CYKLON” dust container into the
vacuum cleaner chamber.
8
Close the cover by pressing it until you hear
a characteristic click.
Filter disassembly
The vacuum cleaner is equipped with a lter element with
cyclone ltration which allows for vacuuming without the
traditional dust bag. A characteristic feature of the cyclone
lter is the use of the air stream whirl to separate solid dirt.
The separation of dirt takes place in the part of the container
with the circle cross section in which the whirling air pushes
the dirt on the wall of the container and next through an
opening to the adjacent chamber of the container. The
initially cleaned air is directed to the cone shaped HEPA 12
lter which retains even the nest dirt fractions. The HEPA 12
lter is equipped with a mesh protection which limits the
accumulation of dirt on the operating surface of the lter, due
to which the service life of the HEPA 12 lter is longer.
E
42

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zelmer Clarris Twix 2750.0 ST bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zelmer Clarris Twix 2750.0 ST in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 3,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info