119
CM4003-001_v01
2
In order to make an espresso coffee, press the
button (SMALL ESPRESSO) or the
button (LARGE
ESPRESSO).
3
Before starting to brew the coffee, it is possible to
select the 2-cup option, it will automatically disappear after
a few seconds.
The 2-cup option is active only with the
ground coffee setting.
4
The machine is preparing an espresso coffee according
to the Menu settings.
If you notice that coffee is dispensed very
slowly, adjust the grinder to a coarser grind
(see “COFFEE BEANS”).
If the machine has been set to „ground coffee” (see
“Coffee Settings”), the following will be displayed:
This button ( ashing) signals the need to ll the
container with ground coffee.
6
Press the button in order to obtain an espresso
coffee.
Never attempt to remove the water tank when
the machine is in the process of brewing
coffee. If during the coffee brewing process
the water level reaches the minimum level,
the machine will stop working. The symbol
will appear on the display and the
repeated sound signal will be heard to remind
you that the water tank needs re lling. More
information can be found in the “FILLING
THE WATER TANK” section. After re lling the
water tank, the sound signal will be stopped,
and the machine will automatically complete
the coffee brewing process.
By pressing the button you can end the
coffee brewing process at any moment.
CAPPUCCINO / LATTE
1
Place a cup on the drip tray grid directly under the
coffee dispensing unit.
Get ready a container with milk.
2
Insert one end of the milk hose into the milk frothing
regulator.
Place the other end in the container with milk.
3
Regulate the milk frothing setting depending on your
needs (
– light milk foam, – medium milk foam,
– dense milk foam).
4
In order to make a Cappuccino, press the
button. In order to make a Latte, press the
button.
5
Before brewing you can choose 2-cups option; it will
disappear automatically after a few seconds.
The 2-cup option is active only with the
ground coffee setting.
6
The machine is preparing a Cappuccino/Latte
according to the Menu settings.
7
If the ground coffee has been selected, proceed
according to the description in the “ESPRESSO COFFEE
section”.
8
After each use of the Cappuccino/Latte function, the
reminder of “milk system rinse” will be displayed.
In order to skip this process and to continue
working with the espresso machine, press
. However, it is recommended to „rinse
milk circuit” after brewing.
