538885
50
Verklein
Vergroot
Pagina terug
1/54
Pagina verder
54 CK2320-001_v01
5
Plug in the power cord plug (17) to a grounded electricity
supply outlet. You will hear a short beep and the water level
indicator will illuminate as the appliance will be turned on.
The water indicator light will turn off
automatically after 40 seconds.
Operating the appliance
BOILING AND MAINTAINING WATER
TEMPERATURE (Fig. E)
1
After plugging in, the appliance will automatically go to
the boiling mode. The (19) (RE-BOIL) LED indicator will
light and the temperature LED indicator (24) will ash for the
value 85°C.
2
Once water comes to a boil, the appliance will go
to the keep warm mode (accompanied by three sound
alarms) and the temperature LED indicator (24) will light for
temperature 85°C.
3
Using the button ( ) (23) it is possible to keep the
water at the following temperatures: 98°C, 85°C or 65°C.
It is also possible to turn off the keep-warm function and go
to the cooling mode ( ).
In the keep-warm mode, when water temperature falls
below the xed value in grades, the appliance will
automatically switch to the keep-warm mode and once
it reaches the appropriate temperature it will return to the
keep-warm mode.
In the cooling mode, the heater is off and water is cooled
automatically to the ambient temperature.
Functions available in the boiling mode: (
, DISPENSE,
/ ).
Functions available in the keep-warm mode: (
,
DISPENSE, / , DECHLORINATE/RE-BOIL).
Water temperature will not change instantly
after pressing the button. The heating and
cooling process takes some time, depending
on the amount of water in the appliance.
4
In order to turn on the re-boiling mode, press the (18)
DECHLORINATE/RE-BOIL button once. The appliance will
start boiling the water.
In the re-boil mode, the
RE-BOIL LED indicator (19) will
light and the temperature LED indicator (24) will ash for
the previously selected temperature.
5
To turn on boiling with dechlorination (in the boil and
re-boil mode), press the DECHLORINATE/RE-BOIL button
(18) twice. The dechlorinate mode will be turned on.
The
RE-BOIL LED indicator (19) and the temperature
LED indicator (24) for the previously selected temperature
will both ash.
After the dechlorination process completes, you will hear
a sound alarm three times, and the RE-BOIL LED indicator
(19) will go out and the temperature LED indicator (24) for
the previously selected temperature will light steadily.
Boiling takes longer with the dechlorination
function and the appliance generates more
steam (be careful not to be scalded).
If there is no sufcient amount of water in the
appliance, the temperature LED indicators (24)
for 98°C and 65°C will ash together. In such
case, add more water to avoid overheating the
inside of the appliance.
Regularly check if the water level is above
the MIN level on the water level indicator (9).
Otherwise, frequent activation of the anti-
overheat protection may cause discolouration
of the inside of the appliance, smell, blown
fuses, and even a re.
POURING WATER AFTER BOILING (Fig. F)
1
Press the lock button (21) / , to unlock the
appliance. The lock light (22) will come on.
After turning on, the appliance is automatically locked
and the lock light (22) is on.
If within 10 seconds after pressing the lock button
(21)
( / ), the DISPENSE button (20) is not pressed or
if no cup or other vessel is placed under the dispensing
spout, the appliance will be locked again and the lock
light (22) will come off.
2
Pour water by pressing the DISPENSE button (20) or by
placing a vessel under the spout (11) so that it will touch the
dispensing unit with its rim.
After using the appliance (Fig. G)
1
Unplug the appliance.
2
Disconnect the power cord from the appliance plug-in
socket (13).
Allow the appliance to cool and remove the lid
(3)
in accordance with the description given in the previous
sections.
3
Pour out all the water through the spout (7).
Make sure that there is no water in the appliance.
Replacing the sealing ring (Fig. H)
If the sealing ring (5) breaks or loses its elasticity, steam may
come out from under the lid (3). In such case, replace the
sealing ring (5) with a new one as follows:
Remove the lid as shown in
Fig. C.
1
Unscrew the 4 xing screws.
2
Take out the inner lid (4).
3
Replace the sealing ring (5).
50

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zelmer CK2320 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zelmer CK2320 in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 3,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info