538929
47
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
47GW41-001_v01
PLUGGING TO A POWER SOURCE
1. Place a compatible utensil on the induction stove.
2. Plugging the cooker to a power source is signalized by a single sound
signal. At this time all functional indicators, as well as the heat power
indicator will ash for a second before going off. The power on/off
indicator will be ashing. The only key working at that stage is the
power on/off button – the rest of the keys remain disabled.
3. When the cooker is plugged to a power source, push the power on/off
button. You will hear a single sound signal and the display panel will
indicate “----”. The cooling fan is now off, which means that the cooker
is now ready for use. If within one minute from plugging the cooker you
do not use the cooker in any way, the device will automatically turn
itself off signaling it with a sound.
4. Within one minute after pressing the power on/off button you can select
a function by pressing the MENU selection key. The selected function
will lit on the display panel. If within one minute from plugging the
cooker you do not activate any function, the device will automatically
turn itself off.
5. If there is no utensil on the induction cooker after selecting a function,
you will hear a pulsating sound signal. The display panel will indicate
an “E1” error code symbol. The function indicator will lit permanently
and the heat power indicator will be pulsating. If within one minute
no utensil will be put on the cooker, the device will automatically turn
itself off. If, however, within that minute a utensil will be placed on the
cooker, the device will check whether the utensil is compatible and after
3 seconds will start the assigned cooking function.
OPERATION INSTRUCTIONS
ATTENTION: Always use a vessel intended for induction cooker,
adequate to each function described below. The diameter of the
inductive utensil bottom should be 12-24 cm.
Boil water function
1. Turn on the cooker by pressing the power on/off button. Using the
MENU key select the Boil water function. The boil water function
indicator will lit up. Maximum power is used for the process of boiling
water, consequently the display panel will show the power level of
“2000”. Power (W) indicator will be lit.
As long as the boiling process continues, all the heat power indicators
will be on. Other indicators will remain off. The Boil water function may
be changed to other functions by pressing the MENU key.
2. If, during the boiling process, a utensil will be taken off the induction
cooker or it will not be there in the rst place, the device will automatically
turn itself off.
3. To set time for the boiling process, press the TIMER key (you can select
from 00:01 to 23:59 minutes). The set time will be counting down on the
display panel. If the settings were not changed, the default time will
be 15 minutes (in such a case the display panel will show power and
not time). Furthermore, if you change the time settings, the Power (W)
indicator will not be lit up and the heat power indicators will ash on
a rotation basis from left to right until the process is over.
4. In order to check the level of power, press the MENU key. Power (W)
indicator will lit up and the display panel will show information about
the power level. After ca. 5 seconds the display panel will go back to
showing timer countdown.
5. After the completion of the process, you will hear a sound signal and
the device will automatically turn itself off. The function does not support
the Keep warm mode. You will be informed about the end of the boiling
process by a ten-times sound signal.
6. At any moment the cooker may be turned off by pushing the Power on/
off button.
Heat milk function
1. Turn on the cooker by pressing the Power on/off button. Using the
MENU key select the Heat milk function. The Heat milk function
indicator and the Power (W) will lit up. Furthermore, four LED on the
display panel, as well as all heat power indicators will ash on a rotation
basis from left to right until the process is over. All other indicators will
be inactive.
2. In this function the device controls both power and temperature. It is not
possible to adjust them (no reaction to pressing the “+” or “-” keys). The
Heat milk function may be changed at any time to other functions by
pressing the MENU key.
3. The function is set for ca. 15 minutes. You will be informed about the
end of the process by a ten-times sound signal. The cooker will check
the temperature inside the utensil. When it reaches 60°C to 80°C, the
cooker will automatically go into the Keep warm mode. The LED on the
display panel will form a “b” symbol. After 2 hours the Keep warm mode
will be turned off.
4. The Power (W) indicator will be lit throughout the process. If you take
the utensil off the cooker or it will not be there, the indicator will go off.
Putting the utensil on the cooker will automatically result in turning the
Power (W) indicator on.
5. At any moment the cooker may be turned off by pushing the Power on/
off button.
Chafing dish function
1. Turn on the cooker by pressing the Power on/off button. Using the
MENU key select the Chang dish function. The Chang dish function
indicator and the Power (W) will lit up. The default power of the function
is “2000”. All power indicators will be will up. Press the “+” or “-” keys
to increase or decrease the power level. You can choose power from
the following levels: 100, 300, 600, 800, 1000, 1200, 1400, 1600, 1800,
2000. The Chang dish function may be changed at any time to other
functions by pressing the MENU key.
2. To set time for the process, press the TIMER key (you can select from
00:01 to 23:59 minutes). The time set will be counting down on the
display panel. If the settings were not changed, the default time will
be 15 minutes (in such a case the display panel will show power and
not time). Furthermore, if you change the time settings, the Power (W)
indicator will not be lit up and the heat power indicators will ash on
a rotation basis from left to right until the process is over.
3. In order to check the level of power, press the MENU key. Power (W)
indicator will lit up and the display panel will show information about
the power level. After ca. 5 seconds the display panel will go back to
showing timer countdown.
4. The automatic anti-overheating safeguard is set to 340°C ±20°C.
If a sensor indicates that the temperature has reached the maximum
safety level or there is a short-circuit, the cooker will automatically turn
off. The display panel will show an “E6” error code symbol. Furthermore,
if there is no water in the utensil, the cooker will automatically turn
itself off within 3 minutes. When the power is at its maximum level, the
cooker will disable the “+” key. Consequently, when the power is at its
minimum level, the cooking will not respond to pressing the “-” key.
5. The function does not support the Keep warm mode. You will be
informed about the end of the process by a ten-times sound signal.
6. At any moment the cooker may be turned off by pushing the Power on/
off button.
47

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zelmer 41Z012 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zelmer 41Z012 in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 1,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Zelmer 41Z012

Zelmer 41Z012 Gebruiksaanwijzing - English, Polski - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info