540093
28
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
28 GW39-008_v01
Outline and parts of the hair clipper (Fig. A)
1
Cutting head
2
Cutting length adjustment knob
3
On/OFF switch
4
LCD display
5
Battery rechargeable
6
Loading socket
7
Attachments (4-6; 10-12; 16-18; 22-24; 28-30 mm)
8
Power supply
9
Cleaning brush
10
Lubricating oil for blades
11
Comb
12
Scissors
LCD display
A
percentage charging level indicator
B
graphical battery charging level indicator
C
mains supply connection indicator
Handling and operation of hair clipper
OPERATION WITH POWER SUPPLY ADAPTOR
At rst insert the adaptor plug into the device and then
insert the adapter plug into the mains supply outlet. In mains
supplied mode the device is ready for use.
LOADING ACCUMULATORS AND CORDLESS
OPERATION
Load the device minimum 16h before rst usage and
when 2–3 next loadings.
Make sure the appliance is switched off before charging.
The process of battery (installed in the trimmer) charging
lasts approximately 2 hours.
The trimmer can work approx. 60 minutes with fully
charged batteries.
Insert the ending of the power supply to the trimmer
charging socket (6),
Insert the plug of the power supply in the mains
supply outlet. The percentage and graphical
charging level indicators show the charging process
advancement (ashing).
When the battery is fully charged, the LCD display
(4)
indicates 100 and it is highlighted in blue.
When the battery charging level decreases below 20, the
graphical battery charging level indicator (B) and mains
supply connection indicator (C) start ashing.
When the battery is almost empty, the display colour
changes into red. Connect the trimmer to the mains supply.
The hair clipper accumulator obtains optimum power
after three cycles of loading and unloading. Ten hours
is enough for next loading. In order to provide long life
of accumulators, they should be completely unloaded
before loading.
COMB ATTACHMENTS INSERTING / REPLACING
Select the attachment according to the length of cutting.
Insert appropriate attachment into the sides of the device.
The protrusions shall be locked inside small holes (see
the gure beside) on left and right sides.
Replace one attachment removing it and inserting
another as described above.
In order to remove an attachment bent one side of assembled
attachment gently and then move it up.
Move the cutting length adjustment knob
(2), to increase/
reduce the hair cutting length. The possible hair cutting
length is indicated on each attachment (i.e. 4–6 mm).
USING THE TRIMMER FOR HEAR CUTTING
Cut the hair for demanded length in stages, start form
bigger length.
Insert an appropriate attachment
(7).
Set the desired length of hair/beard cutting with cutting
length adjustment knob (2).
Start up the hair clipper pressing in ON/OFF button
(3).
Cut only small areas.
Move the clipper slowly along hair.
Hold the device so, that the comb attachment is laid at.
Always start the cutting from the neck upwards or from
the forehead and temples upwards to the top of head.
CUTTING HAIR WITHOUT ATTACHMENT
WARNING: The cutting head (1) is very sharp. Injury
hazard!
Cutting without attachment makes possible to trim the
contour, hair line and whiskers as well as neck shaving.
Turn the device so, that the back part was directed
upwards.
Place the edge of the cutting head
(1) without comb
attachment on desired length of bristle hairline.
Move down the clipper in operation.
Cleaning and maintenance
Start the device pressing in ON/OFF button
(3).
Always switch off the hair clipper and unplug the adaptor
from the mains supply outlet before cleaning and
maintenance.
Remove the comb attachment from the hair clipper.
In order to remove cutting head press the cutting head
blade (1) forward with your thumb, in order to release it
from the frame (Fig. C).
If necessary, rinse the plastic comb attachments under
running water, and then dry them thoroughly.
Remove the remains of hair from the cutting head
(1)
with attached cleaning brush (VII).
Insert the protrusion of cutting head
(1) back into the
locking hole in the frame of cutting head.
Press gently the cutting head
(1) in, until you hear
a clicking sound of locking.
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zelmer 39Z017 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zelmer 39Z017 in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 1,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info