522956
47
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
11
3.3 Wall mounting
Mount the bracket on the wall.
The bracket has fi ve mounting holes.
If required, the bracket can be fi tted to the fl ush-
t casing.
Connect the ComfoControl to the ventilation system;
see § 3.4.
Slide the ComfoControl onto the mounting bracket.
Fasten the bottom of the ComfoControl with a screw.
3.4 Connection to
ventilation system
Connect the 12V DC cable to the connector.
Connect the A/B communication cable to the con-
nector.
The wiring diagram can be found at the rear of the Com-
foControl:
Plug the connector into the 12V DC “POWER” fi tting
on the PCB.
Plug the connector into the RS 485 “COMM” fi tting on
the PCB.
Open Comm Power Relay
Relay
Temp.Sens
Therm RS 485 12V DC 1 2
**AB-+****
The cable specifi cation is: 4 x 0.25 mm
2
protected
(twisted pair).
3.5 Connection to external
temperature sensor
Connect the temperature sensor cable to the connec-
tor.
The wiring diagram can be found at the rear of the Com-
foControl:
Plug the connector into the “TEMP.SENS” fi tting on
the PCB.
Fit both jumpers to the PCB at position 1:2 (left).
Jumpers Left: Temp. Senso
Jumpers Right: Relay 2
Open Comm Power Relay Relay
Temp.
Sens
Therm RS 485 12V DC 1 2
**AB-+**
-
-+
The temperature sensor specifi cation is: NTC 10
KΩ (optional).
The external temperature sensor is optional. The indoor
temperature is usually monitored by an internal tempera-
ture sensor (in the ComfoControl). However, indoor tem-
perature can also be monitored using an external tem-
perature sensor. This may be because the ComfoControl
is to be fi tted in a different location than the one to be
monitored, for example in the hall. It is also possible that
variables in the vicinity of the unit (e.g. wall temperature)
could affect temperature readings. An external tempera-
ture sensor connected to the PCB in the back of the Com-
foControl provides a solution to these problems.
3.6 Commissioning the ventilation
and cooling system
Once fi tted, the ventilation and cooling system must be
commissioned.
This can be done via the P menus of the ComfoControl.
These P menus can be used to enter various settings (and
programmes) for the ventilation and cooling system. An
overview of the available P menus is given below:
For a list of available settings in the P (sub)menus,
please refer to the user manual for your ventila-
tion and/or cooling system.
Accessing P menus
1. Press ”.
2. Press ”.
English
47

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zehnder ComfoControl Luxe bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zehnder ComfoControl Luxe in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 4,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info