3. laat de deur openstaan en schuif de schraper,
als een verlenggootje, in de daarvoor bestemde
opening. Plaats onder het gootje een schaaltje
om het water op te vangen;
4. droog na het ontdooien de vriesruimte
zorgvuldig;
5. bewaar de schraper zodat u hem opnieuw kunt
gebruiken;
6. draai de thermostaatknop in de gewenste stand
of steek de steker weer in het stopcontact. Na
twee of drie uur kunt u de diepvriesproducten
weer terugplaatsen.
Belangrijk
Gebruik voor het verwijderen van de rijp nooit
metalen voorwerpen; u zou uw koelkast kunnen
beschadigen.
Geen voorwerpen of methodes gebruiken om
het ontdooiproces te versnellen die niet door de
fabrikant zijn aangegeven.
Temperatuurstijging van diepvriesproducten kan
hun houdbaarheidsduur verkorten.
ALS ER IETS NIET IN ORDE IS
Indien het apparaat niet functioneert of ook de lamp-
jes niet branden, controleer dan:
• of de stekker goed in het stopcontact zit;
• of de elektriciteit soms uitgevallen is;
• of de thermostaatknop op de juiste stand staat;
• en indien er water op de bodem van de koeler
ligt, of het afvoerkanaaltje soms verstopt is (zie
hoofdstuk “Het ontdooien”).
Kunt u de storing niet zelf lokaliseren en verhelpen,
raadpleeg dan ELECTROLUX SERVICE.
15
CONTENTS
Warnings .................................................................................................................................................14
Use - Cleaning the interior - Control panel - Use of the fridge - Operation - Temperature regulation - .....
Fresh food refrigeration .............................................................................................................................16
Use - Shelf holders - Movable shelves - Positioning the door shelves - Use of the freezer - Operation ...
Temperature regulation .............................................................................................................................17
Use -Quick-freezing - The temperature alarm light - Freezing fresh food - Storage of frozen food - ........
Thawing - Ice-cube production - Cold accumulators....................................................................................18
Hints - Hints for refrigeration - Hints for freezing - Hints for storage of frozen food - Maintenance .......
Periodic cleaning - Periods of no operation...............................................................................................19
Maintenance - Interior light - Defrosting .................................................................................................20
Customer service and spare parts - Installation - Location - Rear spacers - Electrical connection ...21
Installation - Door reversibility..................................................................................................................22
scrape off frost or ice. Frost may be removed by
using the scraper provided. Under no circum-
stances should solid ice be forced off the liner.
Solid ice should be allowed to thaw when
defrosting the appliance. See defrost instruc-
tions.
• Do not place carbonated or fizzy drinks in the
freezer as it creates pressure on the container,
which may cause it to explode, resulting in dam-
age to the appliance. Do not use a mechanical
device or any artificial means to speed up the
thawing process other than those recommended
by the manufacturer. Never use metal objects for
cleaning your appliance as it may get damaged.
Installation
• During normal operation, the condenser and
compressor at the back of the appliance heat up
considerably. For safety reasons, minimum venti-
lation must be as shown in the relevant Figure.
Attention: keep ventilation openings clear of
obstruction.
• There are working parts in this product which
heat up. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss. See
installation instructions.
• Parts which heat up should not be exposed.
Wherever possible the back of the product
should be against a wall.
• If the appliance has been transported horizontal-
ly, it is possible that the oil contained in the com-
pressor flows in the refrigerant circuit. It is advis-
able to wait at least two hours before connecting
the appliance to allow the oil to flow back in the
compressor.
Environment Protection
This appliance does not contain gasses which
could damage the ozone layer, in either its
refrigerant circuit or insulation materials. The
appliance shall not be discarded together with
the urban refuse and rubbish. Avoid damaging
the cooling unit, especially at the rear near the
heat exchanger. Information on your local dis-
posal sites may be obtained from municipal
authorities. The materials used on this appliance
marked by the symbol are recicable.
