528945
17
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
Do not remove the dishes from the appliance until
the washing programme is completed.
Care and cleaning
Before you clean the appliance, deactivate it and dis-
connect the mains plug from the mains socket.
Do not use flammable products or products that can
cause corrosion.
Do not use the appliance without the filters. Make
sure that the installation of the filters is correct. An
incorrect installation causes unsatisfactory washing
results and damage to the appliance.
Do not use spray water or steam to clean the appli-
ance. Risk of electrical shock and damage to the ap-
pliance.
Installation
Make sure that the appliance is not damaged. Do not
install or connect a damaged appliance, contact the
supplier.
Remove all packaging before you install and use the
appliance.
Only a qualified person must do the electrical con-
nection, the plumbing and the installation of the ap-
pliance. This to prevent the risks of structural dam-
age or injury.
Make sure that the mains plug is disconnected from
the mains socket during installation.
Do not drill into the sides of the appliance to prevent
damage to hydraulic components and electrical com-
ponents.
Important!Obey the instructions in the template sup-
plied with the appliance:
To install the appliance.
To assemble the door panel.
To connect to the water supply and drain.
Make sure that the appliance is installed below and
adjacent to safe structures.
Frost precautions
Do not install the appliance where the temperature is
less than 0 °C.
The manufacturer is not responsible for frost dam-
age.
Water connection
Use new hoses to connect the appliance to the water
supply. Do not use used hoses.
Do not connect the appliance to new pipes or pipes
not used for a long time. Let the water flow for some
minutes, then connect the inlet hose.
Make sure not to squash or cause damage to the
water hoses when you install the appliance.
Make sure that the water couplings are tight to pre-
vent a water leakage.
The first time you use the appliance, make sure that
the hoses do not have water leaks.
The water inlet hose has a safety valve and a double
sheath with an inner mains cable. There is pressure
in the water inlet hose only when the water flows. If
there is a leak in the water inlet hose, the safety
valve interrupts the flow of water.
Be careful when you connect the water inlet hose:
Do not put the water inlet hose or the safety
valve in water.
If the water inlet hose or the safety valve are
damaged, immediately disconnect the mains
plug from the mains socket.
Contact the service centre to replace the water
inlet hose with safety valve.
Warning! Dangerous voltage.
Electrical connection
The appliance must be earthed.
Make sure that the electrical information on the rat-
ing plate agrees with the power supply.
Always use a correctly installed shockproof socket.
Do not use multiple plugs and extension cables.
There is a risk of fire.
Do not replace or change the mains cable. Contact
the service centre.
Make sure not to squash or cause damage to the
mains plug and cable behind the appliance.
Make sure that there is access to the mains plug af-
ter the installation.
17
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zanker KDT10000FB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zanker KDT10000FB in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 8,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info