669800
33
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
WARNINGS
During the charging process, a specific quantity of electrical energy is charged into
the battery.
The maximum permissible charge current varies depending on the type and performance
of the battery. The relevant information is supplied from the battery manufacturer.
Only batteries that are stated to be capable of quick-charge are allowed to be
charged at rates higher than the standard charging current.
Always refer to the user manual of the battery about the charging methods,
recommended charging current and charging time. Especially, the lithium battery
should be charged according to the charging instruction provided by the manufacturer
strictly. Special attention should be paid to the connection of lithium battery.
Do not attempt to disassemble the battery pack.
Do not use the battery when the battery is humid.
Please pay attention that lithium battery packs can be wired both in parallel and in series.
In the parallel connection: With the total voltage staying the same, the battery’s
capacity is calculated by multiplying single battery capacity by the number of cells.
The voltage imbalance may cause fire or explosion. The lithium battery is
recommended to charge in series.
INSTALLING THE PROACTION™ BATTERY
WARNING: Lithium batteries are significantly more volatile than alkaline, NiCd or
NiMH batteries. All instructions and warnings must be followed exactly to prevent
property damage and/or serious injury as the mishandling of Lithium batteries can
result in fire.
STEP 1) Slide the battery cover / door from the ProAction™ with slight force.
STEP 2) Install the battery in the battery compartment with the side of balancing head
facing upwards. And then connect the Power Connector to the gimbal.
STEP 3) Once you've installed the battery, put the power line inside the compartment.
Slide the battery cover / door downward with slight force and ensure you hear and feel
a noticeable 'click' indicating the battery cover / door has been closed securely.
ATTACHING THE GB603/CGO4 TO THE PROACTION™
ATTACHING THE GB603/CGO4 TO THE PROACTION™
STEP 1) Withdraw the Gimbal Cord from the left side
first, and then securely attach the GB603/CGO4 to the
ProAction™ with Gimbal Fastening Screws, while
ensuring the "Front" label on the Yaw Motor / Top
Motor is facing toward the FRONT of the ProAction™.
STEP 2) Insert the Gimbal Cord into the center carrying
handle port with the side of pins facing upward.
STEP 3) Install the Fastening Accessory Socket to the
Camera (Take Panasonic camera GH4 as examples).
STEP 4) Flip the camera’s LCD screen for better view-
taking, fold out and then fold in.
32
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yuneec Tornado H920 Industry bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yuneec Tornado H920 Industry in de taal/talen: Engels als bijlage per email.

De handleiding is 3,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info