638625
29
Verklein
Vergroot
Pagina terug
1/33
Pagina verder
VARINO GRANDE 350 - 600
We reserve the right to make changes to dimensions and construction 27 Edition 10.07.2015
© Copyright YGNIS AG CH-Ruswil
9.9. Help in the event of errors
ATTENTION: Opening the casing and manipulating the electrical connections is EXTREMELY DANGEROUS!
The mains fuse must be switched off before the front cover is removed.
WARNING: Due to external connections on the boiler control panel, individual cables or components on the
VARINO GRANDE condensing unit can still be live even when the mains fuse is switched off.
9.9.1. No error code in the display
Unit is cold, the VARINO GRANDE condensing unit is not in operation, no error code is shown in the display.
Status display: First figure = 0
Meaning: The condensing unit has no heat requirement and therefore no start command.
Possible cause: Ygnis heating controller (if present):
The heating controller is set to summer operation or switched off.
The operating instructions of the heating controller provide information on the
individual functions and applications of the heating controller.
External control with heating controller:
- the external heating controller should be checked.
- The heating curve may be set too low
Further procedure: Check cause, unit will start automatically when required.
Status display: First figure = 8
Meaning: Gas pressure monitor input is open
Possible cause: - The gas pressure is inadequate
- The gas cock is closed
- External safety gas valve is defect.
- The external mechanical ventilation does not work or builds up too little
pressure.
Further procedure: Check cause, unit will start automatically when required.
Status display: First figure = A
Meaning: The condensing unit is switched off
Possible cause: Fault lamp "external faults" lights up:
- The neutralisation set connected to the boiler control panel is overfull (if
present),
- external safety devices connected to the boiler control panel (e.g. water
shortage fuse, minimum/maximum pressure monitor, or external STB’s) have
been triggered.
Further procedure: The cause is not related to the condensing unit. After remedy of the external
cause the unit will start again without actuating the RESET button. A 5 minute
ventilation period will precede the start.
Possible cause: Fault lamp "external faults" does not light up:
- The burner switch on the control panel is switched OFF
- The maximum temperature set on the temperature monitor has been exceeded.
Further procedure: Check cause, unit will start automatically when required.
Possible cause: Fault lamp "sealing control" is lit (only when a sealing control has been optionally
added to the gas block):
- The gas supply is closed
- A leak has been found at one of the two gas valves of the gas block.
Further procedure: After the cause has been checked, the fault message must be acknowledged
with the "sealing control" release key. If the device still does not start after
acknowledgement has been made several times, the customer service must be
informed.
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ygnis VARINO GRANDE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ygnis VARINO GRANDE in de taal/talen: Engels als bijlage per email.

De handleiding is 1,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Ygnis VARINO GRANDE

Ygnis VARINO GRANDE Installatiehandleiding - Nederlands - 48 pagina's

Ygnis VARINO GRANDE Gebruiksaanwijzing en installatiehandleiding - Nederlands - 34 pagina's

Ygnis VARINO GRANDE Installatiehandleiding - Deutsch, English, Français, Italiano, Espanõl - 48 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info