652995
29
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
SETTINGS (Menu) Item Setting values Default Explanation
MAC filter
Mode
Off / On Off
Enables/disables the MAC address filter function.
Note
When enabling the MAC address filter, be sure to check the MAC
addresses carefully before clicking “
APPLY
”. Configuring the filter
incorrectly may result in the unit becoming inaccessible. If this happens,
the unit must be restored to the default settings (p.36).
Network Standby
Off / On / Auto Auto
Enables/disables the feature allowing the unit to be turned on by
network devices (Network Standby).
Backup / Recovery
- -
Saves the unit’s current settings to a PC or loads them back from a
PC.
Note
The backup does not contain user information (such as user accounts
and passwords) or unit-specific information (such as its IP address).
Do not operate the unit during the recovery process (loading the
settings back from a PC), as this may result in the incorrect recovery of
the settings. When the recovery finishes, click “OK” to set the unit to
standby mode.
Firmware
- - Updates the unit’s firmware from the web browser.
Licenses
- - Displays license information about the software used by the unit.
* After configuring the network settings, it may be necessary to access the unit again or restart the browser.
SETTINGS2
SETTINGS (Menu) Item Setting values Default Explanation
Sound
Enhancer
Off / On On
Enables/disables the Compressed Music Enhancer feature
(p.42
).
Bass Extension
Off / On Off
Enables/disables extension of the low-frequency range of the
frequency band of the speakers’ playback. When this is “
On”, you
can enjoy rich bass sounds as if you are using significantly larger
speakers.
Monaural Downmix
Off
/ On Off
Enables/disables a mode that plays back stereo signals as
monaural audio.
Direct
Off / On Off
Enables/disables Direct playback. When this is enabled, audio is
played back without being passed through the DSP.
Ultra Low Jitter PLL
Level1-3 Level2
Sets the strength of the jitter removal applied to the audio input
being played back, in order to adjust the audio quality.
When the level is set high, the jitter removal is more effective, but
the sound is likely to cut out.
When the level is set low, the jitter removal is less effective, but the
sound is less likely to cut out.
En
29
29

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Yamaha-WXA-50

Zoeken resetten

  • Heb USB-stick die na formatteren niet meer op de WXA-50 werkt. Bij de keuze van formatteren was alleen de instelling de Byte-grootte instelbaar, maar die instelling heb ik niet gebruikt/veranderd. De Iemand idee wat de oorzaak is, de USB-stick werkt verder op andere apparaten probleemloos. Gesteld op 29-3-2023 om 16:28

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha WXA-50 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha WXA-50 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha WXA-50

Yamaha WXA-50 Gebruiksaanwijzing - Nederlands - 116 pagina's

Yamaha WXA-50 Gebruiksaanwijzing - Nederlands - 45 pagina's

Yamaha WXA-50 Gebruiksaanwijzing - Deutsch - 45 pagina's

Yamaha WXA-50 Gebruiksaanwijzing - Deutsch - 116 pagina's

Yamaha WXA-50 Gebruiksaanwijzing - English, Français - 52 pagina's

Yamaha WXA-50 Gebruiksaanwijzing - Italiano - 116 pagina's

Yamaha WXA-50 Gebruiksaanwijzing - Espanõl - 52 pagina's

Yamaha WXA-50 Gebruiksaanwijzing - Dansk, Svenska, Norsk, Suomi - 116 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info