7
English
1 POWER switch
Press this switch to switch the power on. Press it again to
switch the power off.
2 Display panel
Shows station frequencies and various information. (Refer to
the next page for details.)
3 MEMORY (MAN’L/AUTO FM) button
When this button is pressed, the MEMO indicator flashes for
about 5 seconds. During this period, press the desired PRESET
STATIONS button to enter the displayed station into the memory.
When this button is pressed and holded for about 3 seconds,
the automatic preset tuning begins.
4 A/B/C/D/E button
Press this button to select a desired group (A–E) of preset
stations.
5 PRESET STATIONS buttons
Used to enter as many as 40 station frequencies into the
memory.
6 TUNING (PTY SELECTOR) control
Used to tune in to a desired station. This control is also used
to call a preset RDS station by program type.
7 RDS MODE/FREQ button
When an RDS station is received, pressing this button changes
the display mode into the PS mode, PTY mode, RT mode and/or
CT mode (if the station employs those RDS data services), and
frequency display in turn.
8 PTY SEEK MODE button
When this button is pressed, the unit turns into the PTY SEEK
mode.
9 PTY SEEK START button
Press this button to begin searching for a station after the desired
program type is selected in the PTY SEEK mode.
0 EON button
Press this button to select a desired program type (NEWS,
INFO, AFFAIRS, SPORT) when you want to call a radio
program of that program type automatically.
A FM/AM button
Press this button to switch the reception band to FM or AM.
B TUNING MODE (AUTO/MAN’L MONO) button
Press this button to switch the tuning mode to automatic or
manual. To select the automatic tuning mode, press this
button so that “AUTO” lights up on the display. To select the
manual tuning mode, press this button so that “AUTO” goes off.
C EDIT button
This button is used to exchange the places of two preset
stations with each other.
FRONT PANEL COMPONENTS AND THEIR FUNCTIONS
Front panel
