73
English
5 Press and hold the key (on the other remote control unit) which
has the function you want to store.
* When learning is finished, the TRANSMIT/LEARN indicator
stops lighting and then begins flashing slowly.
* If a signal is not successfully received, the
TRANSMIT/LEARN indicator flashes rapidly and the mode
prior to step 4 is restored. If this occurs, restart from step 4.
* If memory capacity is full, the TRANSMIT/LEARN indicator
flashes rapidly to show you that learning is impossible, and
then the mode before you began learning operations is
restored.
6 Repeat step 3–5 to store more functions.
7 When you finish the learning operation, press the LEARN
button.
NOTES
• Newly learned functions will replace previously learned
functions.
• If there is no more room in the memory area for a function to be
learned, the TRANSMIT/LEARN indicator will flash rapidly. In
this case, even if some keys are not occupied with functions
from other remote control units, no further learning is possible.
• If the lid is closed while learning and about 5 seconds pass, the
TRANSMIT/LEARN indicator flashes rapidly and the mode
before you began learning operations is restored. If this occurs,
restart from step 2. However, if the lid is opened within 5
seconds, the mode before the lid was closed is restored.
• There may occasionally be instances in which, due to the
signal-coding and modulation employed by the other remote
control unit, this remote control unit will not be able to “learn” its
signals.
