464175
50
Verklein
Vergroot
Pagina terug
1/91
Pagina verder
En 50
SETUP
Setting various functions (Setup menu)
Front
Selects the size (sound reproduction capacity) of the front
speakers. J1
Center
Selects the size of the center speakers.
Sur. LR
Selects the size of the surround speakers.
Sur. B
Selects the size of the surround back speakers.
Crossover
Sets the lower limit of low-frequency component output from
speakers set to “Small.
Audio with a frequency below that limit will be produced from the
subwoofer or the front speakers. J3
SWFR Phase
Sets the phase of the subwoofer if the bass audio is lacking or
unclear.
Extra Bass
Allows the front channel low-frequency components to be
produced exclusively by the subwoofer, or by both the subwoofer
and the front speakers.
Small (Default) Select this for small speakers. The subwoofer will
produce front channel low-frequency
components. J2
Large Select this for large speakers. The front speakers will
produce all of the front channel frequency
components.
None Select this when there is no center speaker. The front
speakers will produce center channel audio.
Small (Default) Select this when a small center speaker is connected.
Large Select this when a large center speaker is connected.
None Select this when no surround speakers are connected.
The front speakers will produce surround channel
audio signals.
Small (Default) Select this when the surround speakers are small.
Large Select this when the surround speakers are large.
When set to “None,” no sound is produced from the surround
back speaker even if that speaker is connected.
When set to “None,” the sound field programs will change to
Virtual CINEMA DSP mode.
None (Default) Select this when no surround back speakers are
connected.
SMLx1 Select when one small surround back speaker is
connected.
SMLx2 Select when two small surround back speakers are
connected.
LRGx1 Select when one large surround back speaker is
connected.
LRGx2 Select when two large surround back speakers are
connected.
When there are no surround speakers are inactive, the setting will
automatically change to “None.
You can set surround back audio signals, including from the
playback source, to be mixed down and produced from a single
speaker (6.1-channel layout) or produced from left and right
surround back speakers (5.1-channel layout).
40Hz 110Hz
60Hz 120Hz
80Hz (Default) 160Hz
90Hz 200Hz
100Hz
NRM (Default) Does not change the subwoofer phase.
REV Reverses the subwoofer phase.
ON The subwoofer and the front speakers produce the
front channel low-frequency components.
OFF (Default) Depending on the size of the front speakers, either the
front speakers or the subwoofer produce the front
channel low-frequency components.
When the “Subwoofer” is set to “None,” the “Extra Bass”
setting is disabled.
J
1 : When “Subwoofer” is set to “None,” you can only choose “Large.” If the front
speaker setting is “Small” and you change “Subwoofer” to “None,” it will
automatically change to “Large.
J
2 : You can set the low-frequency components of audio signals transmitted from
the front speakers to the subwoofer by using “Crossover” setting.
J
3 : If your subwoofer has a volume control or a crossover frequency control, set
the crossover frequency to maximum and the volume to half (or slightly less).
50

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha RX-V467 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha RX-V467 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha RX-V467

Yamaha RX-V467 Snelstart handleiding - Nederlands - 8 pagina's

Yamaha RX-V467 Gebruiksaanwijzing - Nederlands - 83 pagina's

Yamaha RX-V467 Snelstart handleiding - Deutsch - 8 pagina's

Yamaha RX-V467 Gebruiksaanwijzing - Deutsch - 91 pagina's

Yamaha RX-V467 Snelstart handleiding - English - 8 pagina's

Yamaha RX-V467 Gebruiksaanwijzing - Français - 91 pagina's

Yamaha RX-V467 Snelstart handleiding - Français - 8 pagina's

Yamaha RX-V467 Gebruiksaanwijzing - Italiano - 91 pagina's

Yamaha RX-V467 Snelstart handleiding - Italiano - 8 pagina's

Yamaha RX-V467 Gebruiksaanwijzing - Espanõl - 91 pagina's

Yamaha RX-V467 Snelstart handleiding - Espanõl - 8 pagina's

Yamaha RX-V467 Snelstart handleiding - Svenska - 8 pagina's

Yamaha RX-V467 Gebruiksaanwijzing - Svenska - 91 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info