492656
32
Verklein
Vergroot
Pagina terug
1/151
Pagina verder
En 32
3
Configure the settings for HDMI Control.
a Enable HDMI Control on the TV and playback devices (HDMI Control-compatible BD/
DVD player, etc).
b Turn off the main power of the TV and then turn off this unit and playback devices.
c Turn on this unit and playback devices and then turn on the main power of the TV.
d Switch the TV input to display the video from this unit.
e Check the followings.
On this unit: The input to which the playback device is connected is selected. If not,
select the input source manually.
On the TV: The video from the playback device is displayed.
f Check that this unit is properly synchronized with the TV by turning off the TV or
adjusting the TV volume with the TV remote control.
Now the necessary settings are complete.
If you select a TV program with the TV remote control, the input source of this unit will
be automatically switched to “AUDIO1” and the TV audio will be played back on this
unit.
If HDMI Control does not work properly, try turning off and on (or unplugging and re-plugging) the
devices. It may solve the problem.
“AUDIO1” is set as TV audio input at the factory. If you have connected any external device to the
AUDIO1 jacks, use “TV Audio Input” (p.111) in the “Setup” menu to change the TV audio input
assignment. To use the SCENE function (p.53), you also need to change the input assignment for
SCENE(TV).
Connection method 3 (TV with HDMI input jacks)
Connect the TV to this unit with an HDMI cable and an audio cable (digital optical or
stereo pin cable).
If switch the input source of this unit to “AUDIO1” by pressing AUDIO1 or SCENE(TV),
the TV audio will be played back on this unit.
If you make an HDMI connection between your TV and this unit, any videos input to this unit can be output
to the TV no matter how you connect video devices to this unit. For details, see “Video signal flow” (p.143).
You can connect another TV or a projector by using the HDMI OUT 2 jack (p.34).
If you have connected any external device to the AUDIO1 jacks, connect the TV to one of the AUDIO2~4
jacks. To use the SCENE function (p.53), you also need to change the input assignment for SCENE(TV).
FM
75Ω
ANTENNA
AM
(4 RADIO)
AV 1
(1 BD/DVD)
COAXIAL
1
DOCK
YP
B
OPTICAL
AV OUT
R
L
HDMI OUT
ARC
1 2
(1
MONITOR OUT/
ZONE OUT
AV 1
AV 1
AV 3 AV 4AV 2
AUDIO 4AUDIO 3AUDIO 2
(3 CD)
AUDIO 1
(2 TV)
FRONT
5
OPTICAL
4
OPTICAL
3
COAXIAL
2
COAXIAL
6
SURROUND
R L
PHONO
NETWORK
A
AV 2
B
GND
HDMI
HDMI OUT
ARC
12
OPTICAL
AUDIO 1
(2 TV)
5
AUDIO
OPTICAL
R
L
OO
L
R
L
R
HDMI
HDMI
This unit (rear)
HDMI OUT 1 jack
AUDIO1 (OPTICAL or AUDIO)
jacks
Audio output
(digital optical or analog stereo)
TV
HDMI input
1 2
TV connection
3 4 5 6 7 8 9
32

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Yamaha-RX-A2010

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha RX-A2010 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha RX-A2010 in de taal/talen: Engels als bijlage per email.

De handleiding is 13,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha RX-A2010

Yamaha RX-A2010 Gebruiksaanwijzing - Nederlands - 151 pagina's

Yamaha RX-A2010 Snelstart handleiding - Nederlands - 8 pagina's

Yamaha RX-A2010 Snelstart handleiding - English - 8 pagina's

Yamaha RX-A2010 Gebruiksaanwijzing - Français - 151 pagina's

Yamaha RX-A2010 Gebruiksaanwijzing - Espanõl - 151 pagina's

Yamaha RX-A2010 Gebruiksaanwijzing - Dansk - 151 pagina's

Yamaha RX-A2010 Gebruiksaanwijzing - Svenska - 151 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info