635592
12
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
12
10
Setting Up
This section contains information about setting up your PSR-540 and preparing to play.
Be sure to go through this section carefully before turning the power on.
CAUTION
Never interrupt the power
supply (e.g. remove the
batteries or unplug the AC
adaptor) during any PSR-
540 record operation!
Doing so can result in a
loss of data.
Power supply connections
Although the PSR-540 will run either from an optional AC adaptor or batteries,
Yamaha recommends use of the more environmentally safe AC adaptor. Follow the
instructions below according to the power source you intend to use.
Using An Optional AC Power Adaptor
1
Make sure that the STANDBY/ON switch of the
PSR-540 is set to STANDBY.
WARNING
Use ONLY a Yamaha PA-6
AC Power Adaptor (or
other adaptor specifically
recommended by Yamaha)
to power your instrument
from the AC mains. The
use of other adaptors may
result in irreparable
damage to both the
adaptor and the PSR-540.
Unplug the AC Power
Adaptor when not using
the PSR-540, or during
electrical storms.
Using Batteries
For battery operation the PSR-540 requires six 1.5V SUM-1, “D” size, R-20 or equiva-
lent batteries. When the batteries need to be replaced, “Battery Low” may appear on
top of the display, the volume may be reduced, the sound may be distorted, and other
problems may occur. When this happens, turn the power off and replace the batteries.
Replace the batteries as follows:
CAUTION
When the batteries run
down, replace them with a
complete set of six new
batteries. NEVER mix old
and new batteries.
Do not use different kinds
of batteries (e.g. alkaline
and manganese) at the
same time.
If the instrument is not to
be in use for a long time,
remove the batteries from
it, in order to prevent
possible fluid leakage from
the battery.
Plugging or unplugging
the AC power adaptor
while the batteries are
installed will reset the
PSR-540 to the defaults.
3
Plug the AC adaptor into an AC outlet.
When turning the power OFF, simply reverse the
procedure.
1
Open the battery compartment cover located on the instrument’s bottom panel.
2
Insert the six new batteries, being careful to follow the polarity markings on the
inside of the compartment.
3
Replace the compartment cover, making sure that it locks firmly in place.
2
Connect the AC adaptor (PA-6 or other adaptor
specifically recommended by Yamaha) to the
power supply jack.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha PSR-540PC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha PSR-540PC in de taal/talen: Engels als bijlage per email.

De handleiding is 3,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info