516946
5
Verklein
Vergroot
Pagina terug
1/66
Pagina verder
3 En
English
Installation of USB drivers
The installation procedure is variable depending on OS. After
“Common operations” below, follow the installation procedure for
your OS.
You may need the CD-ROM of the OS running on your computer
to install the device drivers. For details, refer to the manuals of your
computer.
The following installation procedures for the device driver
installation method may not be applicable to certain PC
environments. In this case, follow the instructions given in the
displayed dialog boxes. Consult the PC manufacturer or your
computer dealer in case of doubt.
When you change the connecting USB port to another one, it may
be required to reinstall the USB driver.
The displayed messages etc. may vary depending on your computer
or OS.
When installing USB drivers into an OS other than the ones
mentioned below, refer to the manuals of your computer.
Common operations
1 Switch on your computer to boot the OS.
2 Connect this unit to your computer.
For the connection method, see steps 1 to 4 in “1 When
using USB bus power” on page 2.
Installing on Windows Vista, Windows XP,
Windows 2000 or Mac OS*
Press POWER to switch on this unit.
Your computer detects this unit and installs the necessary
devices automatically.
This unit gets ready for use after completion of the installation.
* (Mac OS 9.1 or later, Mac OS X 10.0 or later)
Installing on Windows Me
1 Press POWER to switch on this unit.
2 Install the USB-Compatible Device.
Your computer automatically detects the “USB-Compatible
Device” and installs it.
3 Install the USB Audio Device.
[Add New Hardware Wizard] is displayed
T
Window: [
Windows has found the following new hardware
]
Check “USB Audio Device” is displayed
Window: When [Digital signature confirmation] is
displayed
Check “USB Audio Device” is displayed
Select [Yes]
T Click [OK]
Select “
Automatic search for a better driver. [Recommended]
T Click [Next]
Your computer automatically detects the “USB Audio
Device” and installs it.
Check “Windows has finished installing the software for
the new hardware device” is displayed
Click [Finish]
4 Install the USB Human Interface Device.
Your computer automatically detects the “USB Human
Interface Device” and installs it.
This unit gets ready for use after completion of the
installation.
Installing on Windows 98SE
1 Press POWER to switch on this unit.
[Add New Hardware Wizard] is displayed
2 Install the USB-Compatible Device.
Window: [This wizard searches for new drivers for]
Check “USB-Compatible Device” is displayed
T Click [Next]
Select “Search for the best driver for your device.
[Recommended]
T Click [Next]
Select “CD-ROM Drive
*At this time, leave the items checked by default.
T Click [Next]
Window: When [Add New Hardware Wizard] is displayed
Select “The updated driver [Recommended]
T Click [Next]
Window: [Windows driver file search for the device]
Check “USB-Compatible Device” is displayed
T Click [Next]
Check “Windows has finished installing the software
that your new hardware device requires.” is displayed
Click [Finish]
3 Install the USB Human Interface Device.
Window: [This wizard searches for new drivers for]
Check “USB Human Interface Device” is displayed
T Click [Next]
Select “Search for the best driver for your device.
[Recommended]
T Click [Next]
Select “CD-ROM Drive
*At this time, leave the items checked by default.
T Click [Next]
Window: [Windows driver file search for the device]
Check “USB Human Interface Device” is displayed
T Click [Next]
Check “Windows has finished installing the software
that your new hardware device requires.” is displayed
Click [Finish]
4 Install the USB Audio Device.
Window: [This wizard searches for new drivers for]
Check “USB Audio Device” is displayed
T Click [Next]
Select “
Search for the best driver for your device.
[Recommended]
T Click [Next]
Select “CD-ROM Drive
*At this time, leave the items checked by default.
T Click [Next]
Window: [Windows driver file search for the device]
Check “USB Audio Device” is displayed
T Click [Next]
Check “Windows has finished installing the software
that your new hardware device requires.” is displayed
Click [Finish]
This unit gets ready for use after completion of the
installation.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha NX-U10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha NX-U10 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Zweeds als bijlage per email.

De handleiding is 1,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info