590429
11
Verklein
Vergroot
Pagina terug
1/49
Pagina verder
Before using this instrument, be sure to read “PRECAUTIONS”
on pages 6 – 7.
N3: When assembling or transporting the unit, consult a
qualified AvantGrand dealer. (Refer to page 41 for the assembly
instructions.)
Achten Sie darauf, vor Einsatz dieses Instruments die
„VORSICHTSMASSNAHMEN“ auf Seiten 6-7 durchzulesen.
N3: Wenden Sie sich bezüglich Zusammenbau und Transport
des Gerätes an einen qualifizierten AvantGrand-Händler. (Lesen
Sie auf Seite 41 für Anweisungen zur Montage.)
Avant d'utiliser cet instrument, lisez attentivement la section
« PRÉCAUTIONS D'USAGE » aux pages 6-7.
N3: Lors de l'assemblage ou du transport de l'unité, consultez un
revendeur qualifié AvantGrand. (Reportez-vous à la page 41
pour obtenir des instructions sur le montage.)
Antes de utilizar el instrumento, lea la sección
“PRECAUCIONES”, en las páginas 6-7.
N3: Al montar o transportar la unidad, consulte a un distribuidor
cualificado de AvantGrand. (Consulte las instrucciones de
montaje en la página 41.)
ES
FR
DE
EN
Owner’s Manual
Bedienungsanleitung
Mode d’emploi
Manual de instrucciones
ENGLISHDEUTSCH
FRANÇAIS
ESPAÑOL
2 N3/N2 Owner’s Manual
SPECIAL MESSAGE SECTION
PRODUCT SAFETY MARKINGS: Yamaha electronic
products may have either labels similar to the graphics
shown below or molded/stamped facsimiles of these graph-
ics on the enclosure. The explanation of these graphics
appears on this page. Please observe all cautions indicated
on this page and those indicated in the safety instruction sec-
tion.
See bottom of Keyboard enclosure for graphic symbol markings.
The exclamation point within the equi-
lateral triangle is intended to alert the
user to the presence of important operat-
ing and maintenance (servicing) instruc-
tions in the literature accompanying the
product.
The lightning flash with arrowhead sym-
bol, within the equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage”
within the product’s enclosure that may
be of sufficient magnitude to constitute a
risk of electrical shock.
IMPORTANT NOTICE: All Yamaha electronic products
are tested and approved by an independent safety testing
laboratory in order that you may be sure that when it is prop-
erly installed and used in its normal and customary manner,
all foreseeable risks have been eliminated. DO NOT modify
this unit or commission others to do so unless specifically
authorized by Yamaha. Product performance and/or safety
standards may be diminished. Claims filed under the
expressed warranty may be denied if the unit is/has been
modified. Implied warranties may also be affected.
SPECIFICATIONS SUBJECT TO CHANGE: The
information contained in this manual is believed to be cor-
rect at the time of printing. However, Yamaha reserves the
right to change or modify any of the specifications without
notice or obligation to update existing units.
ENVIRONMENTAL ISSUES: Yamaha strives to produce
products that are both user safe and environmentally
friendly. We sincerely believe that our products and the pro-
duction methods used to produce them, meet these goals. In
keeping with both the letter and the spirit of the law, we
want you to be aware of the following:
Battery Notice: This product MAY contain a small non-
rechargeable battery which (if applicable) is soldered in
place. The average life span of this type of battery is approx-
imately five years. When replacement becomes necessary,
contact a qualified service representative to perform the
replacement.
Warning: Do not attempt to recharge, disassemble, or incin-
erate this type of battery. Keep all batteries away from chil-
dren. Dispose of used batteries promptly and as regulated by
applicable laws. Note: In some areas, the servicer is required
by law to return the defective parts. However, you do have the
option of having the servicer dispose of these parts for you.
Disposal Notice: Should this product become damaged
beyond repair, or for some reason its useful life is consid-
ered to be at an end, please observe all local, state, and fed-
eral regulations that relate to the disposal of products that
contain lead, batteries, plastics, etc.
NOTICE: Service charges incurred due to lack of knowl-
edge relating to how a function or effect works (when the
unit is operating as designed) are not covered by the manu-
facturer’s warranty, and are therefore the owners responsi-
bility. Please study this manual carefully and consult your
dealer before requesting service.
NAME PLATE LOCATION: The graphic below indicates
the location of the name plate. The model number, serial
number, power requirements, etc., are located on this plate.
You should record the model number, serial number, and the
date of purchase in the spaces provided below and retain this
manual as a permanent record of your purchase.
Model
Serial No.
Purchase Date
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
N3 N2
92-469- (bottom)
N3/N2 Owner’s Manual 3
The above warning is located on the bottom of the unit.
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
2Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
13 Unplug this apparatus during
lightning storms or when unused for long periods of
time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
(UL60065_03)
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT. The wires in this mains lead are coloured in accordance with the fol-
lowing code:
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond
with the coloured makings identifying the terminals in your plug proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked
with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is
marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of the three pin plug.
This applies only to products distributed by Yamaha Music U.K. Ltd. (2 wires)
1
4 N3/N2 Owner’s Manual
ENGLISH
Hybrid Piano
Combining over one hundred years of superb piano
craftsmanship with the latest advanced technologies,
Yamaha is proud to introduce a true hybrid acoustic/
digital piano that meets the demands of contemporary
musicians.
Authentic Acoustic Piano Touch with Special Grand Piano Action and Piano Keyboard
This brand new, innovative keyboard delivers the rich expressive quality of an actual grand piano, thanks to its finely
nuanced touch and exceptional response. Drawing on our many decades of expertise in crafting grand pianos, Yamaha
has created a unique and yet wholly traditional piano action mechanism for the Avant Grand—employing an action in
which the hammers hit the strings from underneath, just as on an actual grand piano. The action of the hammers and
the balance of each hammer weight have been meticulously adjusted to give this revolutionary keyboard an exception-
ally natural and consistent feel. The keyboard also uses real-wood keys, just as on a real grand piano, and the white keys
are made from the special material “Ivorite,” developed specifically by Yamaha to recreate the natural feel of ivory.
The result is an amazingly expressive keyboard that lets your fingers dance lightly over the keys when playing rapid pas-
sages, and provides firm response when playing slow passages—for an authentic touch and feel that goes far beyond any
existing digital piano.
The Realistic Ambience of Grand Piano Voice
The N3/N2 features Yamahas original brand new four-channel Multi Sampling tone-generation sampling technology
for the grand piano voices. The voices are recorded at the left, right, center and rear positions of a grand piano, giving
performers the rich resonance and sonic power heretofore only available on an actual grand piano.
The instrument also utilizes a new four-channel Multi Speaker System, in which each speaker is equipped with its own
dedicated amplifier. This is essential for preserving the sonic integrity of each frequency range and making sure that
every musical part and all of its nuances are reproduced naturally with absolute clarity. In addition, the N3 is equipped
with a special flat resonator inside the instrument to enhance the expressive response of the sound, providing a realistic
response especially for the high notes.
True Grand Piano Resonance
The Avant Grand features a special TRS (Tactile Response System), which realistically reproduces the resonance of the
instrument, or the vibration that you feel from the keys or the pedals when you play an actual grand piano. You can
switch the function on/off, and the strength of vibration can be adjusted in three levels.
Flexible Volume Control
Unlike acoustic pianos, the Avant Grand gives you full control over the instrument volume, letting you adjust the level
just as desired. Also, you can play or listen in total privacy through one or two pairs of headphones. The innovative TRS
system enables you to feel the natural vibration of real acoustic grand piano even when using headphones.
2
N3/N2 Owner’s Manual 5
ENGLISH
Table of Contents
PRECAUTIONS ..........................................................6
Introduction
Panel Controls and Terminals ......................................8
Playing the Keyboard ................................................10
Using the Pedals...................................................14
Using Headphones (option) .................................14
Music Rest ...........................................................15
Reference
Listening to the Preset Songs .....................................16
Basic Operations and More........................................18
Selecting Voices....................................................18
Listening to the Voice Demo Songs......................19
Using the Metronome ..........................................20
Adjusting the Keyboard Touch
(Touch Sensitivity)............................................22
Adjusting the Strength of Vibration (TRS)...........23
Adding Variations to the Sound — Reverb ..........23
Transposition .......................................................24
Fine-tuning the Pitch ...........................................25
Scale Tuning ........................................................26
Recording your Performance .....................................27
Playing Back the Song Recorded
to the Instrument ..............................................28
Saving Your Recorded Performance
to USB Flash Memory.......................................29
Listening to songs in USB Flash Memory..................31
Formatting USB Flash Memory.................................33
Backing up Data and Initializing the Settings ...........34
Backup data in internal memory...........................34
Initializing the data...............................................34
Connections...............................................................35
Connectors...........................................................35
About MIDI ..............................................................37
Connecting to a Computer...................................37
Local Control On/Off ..........................................38
Appendix
Message List...............................................................39
Troubleshooting.........................................................40
N3: Assembling the Unit ...........................................41
Specifications.............................................................43
Index..........................................................................44
Quick Operation Guide.............................................47
* The illustrations and displays as shown in this manual are for instructional purposes only, and may appear somewhat different from
those on your instrument.
* The panel illustrations shown in this manual are taken from the N3.
Accessories
Owner’s Manual
AC Power Cord
Cord Holders (3 pcs.)
Felt Key Cover
Bench*
* Included or optional depending on locale.
My Yamaha Product User Registration*
* The PRODUCT ID on the sheet will be needed when you fill
out the User Registration form.
Data List
You can download various MIDI-related reference materials, such as the MIDI Data Format and MIDI Implementation
Chart, from the Yamaha Manual Library.
Connect to the Internet, visit the following website, type the model name of your instrument (such as “N3”) in the
Model Name text box, then click the Search button.
Yamaha Manual Library
http://www.yamaha.co.jp/manual/
Getting started playing your new Avant Grand!
This section explains how to make detailed settings for the
instrument’s various functions.
This section includes a list of display messages, Quick
Operation Guide and other information.
3
6 N3/N2 Owner’s Manual
ENGLISH
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Only use the voltage specified as correct for the instrument. The required
voltage is printed on the name plate of the instrument.
Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
Use only the supplied power cord/plug.
Do not place the power cord near heat sources such as heaters or radiators, and
do not excessively bend or otherwise damage the cord, place heavy objects on
it, or place it in a position where anyone could walk on, trip over, or roll anything
over it.
Do not open the instrument or attempt to disassemble the internal parts or
modify them in any way. The instrument contains no user-serviceable parts. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or wet
conditions, or place containers on it containing liquids which might spill into
any openings. If any liquid such as water seeps into the instrument, turn off the
power immediately and unplug the power cord from the AC outlet. Then have
the instrument inspected by qualified Yamaha service personnel.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.
If the power cord or plug becomes frayed or damaged, or if there is a sudden
loss of sound during use of the instrument, or if any unusual smells or smoke
should appear to be caused by it, immediately turn off the power switch,
disconnect the electric plug from the outlet, and have the instrument inspected
by qualified Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
When removing the electric plug from the instrument or an outlet, always hold
the plug itself and not the cord. Pulling by the cord can damage it.
Remove the electric plug from the outlet when the instrument is not to be used
for extended periods of time, or during electrical storms.
Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.
Read carefully the attached documentation explaining the assembly process.
Failure to assemble the instrument in the proper sequence might result in
damage to the instrument or even injury.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or
heat (such as in direct sunlight, near a heater, or in a car during the day) to
prevent the possibility of panel disfiguration or damage to the internal
components.
Do not use the instrument in the vicinity of a TV, radio, stereo equipment,
mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio
may generate noise.
Do not place the instrument in an unstable position where it might accidentally
fall over.
Before moving the instrument, remove all connected cables.
When setting up the product, make sure that the AC outlet you are using is
easily accessible. If some trouble or malfunction occurs, immediately turn off
the power switch and disconnect the plug from the outlet. Even when the power
switch is turned off, electricity is still flowing to the product at the minimum
level. When you are not using the product for a long time, make sure to unplug
the power cord from the wall AC outlet.
Before connecting the instrument to other electronic components, turn off the
power for all components. Before turning the power on or off for all
components, set all volume levels to minimum. Also, be sure to set the volumes
of all components at their minimum levels and gradually raise the volume
controls while playing the instrument to set the desired listening level.
In the case of a model with a polished finish, gently remove dust and dirt with a
soft cloth. Do not wipe too hard since small particles of dirt can scratch the
instrument’s finish.
When cleaning the instrument, use a soft, dry or slightly damp cloth. Do not use
paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping
cloths.
During extreme changes in temperature or humidity, condensation may occur
and water may collect on the surface of the instrument. If water is left, the
wooden parts may absorb the water and be damaged. Make sure to wipe any
water off immediately with a soft cloth.
Power supply/Power cord
Do not open
Water warning
Fire warning
If you notice any abnormality
Power supply/Power cord
Assembly (N3)
Location
Connections
Maintenance
(1)B-13 1/2
4
N3/N2 Owner’s Manual 7
ENGLISH
•Take care that the key cover does not pinch your fingers, and do not insert a
finger or hand in any gaps on the fallboard or instrument.
Never insert or drop paper, metallic, or other objects into the gaps on the
fallboard, panel or keyboard. If this happens, turn off the power immediately and
unplug the power cord from the AC outlet. Then have the instrument inspected
by qualified Yamaha service personnel.
Do not place vinyl, plastic or rubber objects on the instrument, since this might
discolor the panel or keyboard.
In the case of a model with a polished finish, bumping the surface of the
instrument with metal, porcelain, or other hard objects can cause the finish to
crack or peel. Use caution.
Do not rest your weight on, or place heavy objects on the instrument, and do not
use excessive force on the buttons, switches or connectors.
Do not use the instrument/device or headphones for a long period of time at a
high or uncomfortable volume level, since this can cause permanent hearing
loss. If you experience any hearing loss or ringing in the ears, consult a
physician.
Do not place the bench in an unstable position where it might accidentally fall
over.
Do not play carelessly with or stand on the bench. Using it as a tool or step-
ladder or for any other purpose might result in accident or injury.
Only one person should sit on the bench at a time, in order to prevent the
possibility of accident or injury.
Do not attempt to adjust the bench height while sitting on the bench, since this
can cause excessive force to be imposed on the adjustment mechanism,
possibly resulting in damage to the mechanism or even injury.
If the bench screws become loose due to extensive long-term use, tighten them
periodically using the included tool.
Saving and backing up your data
The song data saved to internal memory of this instrument is retained even
when the power is turned off. However, the data could be lost due to malfunction
or incorrect operation. Save important data to a USB storage device (page 29).
Backing up the USB storage device
•To protect against data loss through media damage, we recommend that you
save your important data onto two USB storage devices.
Always turn the power off when the instrument is not in use.
Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use.
Tuning
Unlike an acoustic piano, the instrument does not need to be tuned. It always stays perfectly in tune.
However, if you feel something wrong concerning the keyboard touch, contact your Yamaha dealer.
Handling caution Using the bench (If included)
Saving data
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others’
copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any
unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON’T
MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.
IMPORTANT – Check your power supply –
Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the
bottom of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the
unit is initially shipped. To change the setting use a “minus” screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel.
Transporting / Placing
If you move to another location, transport the instrument horizon-
tally. Do not lean it up against a wall or stand it up side down. Do not
subject the instrument to excessive vibration or shock.
When moving the instrument, always hold the bottom of the main unit.
Be sure not to hold the control panel located on the bottom left. Improper handling
can result in damage to the instrument or personal injury
N3: To enhance the safety and to protect the floor, we recommend to put the instru-
ment on caster cups.
N2: Place the instrument away from the wall so that you can open or close the lid.
(Rear: at least 15 cm, Side: at least 10 cm)
If you find the instrument shaky or unstable after installing, insert the included felt
strips. For details, refer to the instructions supplied with the felt strips.
Do not hold here.
Hold here.
Do not hold the control panel.
CAUTION
(1)B-13 2/2
5
8 N3/N2 Owner’s Manual
ENGLISH
Panel Controls and Terminals
Overview
N3
Jacks and Terminals (page 9)
Power switch
(page 12)
Control panel
(page 9)
Pedals
(page 14)
Music rest
(page 15)
Lid
(pages 11, 13)
Stay
(page 11)
Fallboard
(pages 11, 13)
[AC IN] connector
(page 10)
Jacks and Terminals
(page 9)
N2
Music rest
(page 15)
Lid (pages 12, 13)
Power switch
(page 12)
Control panel
(page 9)
[AC IN] connector
(page 10)
Pedals
(page 14)
Jacks and Terminals (page 9)
Fallboard
(pages 11, 13)
Jacks and Terminals
(page 9)
Introduction
The jacks and terminals on the underside of the instrument as shown here may seem to be in reverse from your
perspective in front of the instrument. Make sure when using these to carefully check the names as printed on
the panel before making connections.
6
N3/N2 Owner’s Manual 9
Panel Controls and Terminals
ENGLISH
Control Panel
q [MASTER VOLUME] control ....................... page 12
w Display ................................................... See below.
e [RECORD] button.........................................page 27
r [PLAY/STOP] button.................pages 16, 19, 28, 31
t [+]/[-] button
y [DEMO/SONG] button..............pages 16, 19, 28, 31
u [PIANO/VOICE] button .................................page 18
i [TRS] button .................................................page 23
o [REVERB] button .........................................page 23
!0 [METRONOME] button.................................page 20
!1 [FUNCTION] button........................pages 24, 26, 38
*Song : In this manual, performance data is called a “Song. This means preset songs (page 16), voice demos (page 19), user songs (page
28) and USB songs (page 31).
Jacks and Terminals
!2 [PHONES] jacks...........................................page 14
!3 USB [TO DEVICE] terminal..........................page 35
!4 MIDI [IN] [OUT] connectors..........................page 37
!5 AUX IN [L/L+R] [R] jacks..............................page 36
!6 AUX OUT [L/L+R] [R] jacks..........................page 36
q
w
er t yuio!0 !1
The control panel is located at the
bottom left of the instrument. Slide
the panel out to use it.
Do not pull on the [MASTER VOLUME] control to slide out the
control panel.
CAUTION
Display
Normally indicates the currently
selected song* number. (When no song
is selected, nothing is displayed.)
As you change the settings of each function,
the parameter value appears briefly before
returning to the song number display.
The TRS or reverb setting value is dis-
played while the [TRS] or [REVERB]
button is held.
For more information, refer to the instructions on each function. The message list (page 39) is also available for your reference.
d01
(Song number)
0 d01
(Parameter value) (Song number) (TRS or reverb value)
t02
!2 !3 !4 !5 !6
7
10 N3/N2 Owner’s Manual
ENGLISH
Playing the Keyboard
1
Connecting the power cord
1-1
Set the voltage selector and insert the power cord plug to
the [AC IN] connector. Refer to the “Panel Controls and
Terminals” on page 8 for information on the location of
the [AC IN] connector.
1-2 Attach the included cord holders to the instrument, then clip the power cord into the holder.
1-3 Insert the plug on the other end of the power cord to a standard AC outlet.
Voltage
Selector
[AC IN] connector
Voltage Selector
Before connecting the AC power cord, check the setting of the voltage selector which is provided in some
areas. To set the selector for 110V, 127V, 220V or 240V main voltages, use a “minus” screwdriver to rotate
the selector dial so that the correct voltage for your region appears next to the pointer on the panel. The
voltage selector is set at 240V when the unit is initially shipped. After the proper voltage has been selected,
connect the AC power cord to the AC IN and an AC wall outlet. A plug adaptor may be also provided in
some areas to match the pin configuration of the AC wall outlets in your area.
Make sure your instrument is rated for the AC voltage supplied in the area in which it is to be used. (The voltage rating appears on the
name plate on the bottom panel). Connecting the unit to an inappropriate AC supply can seriously damage the internal circuitry and may
even pose a shock hazard!
WARNING
Use only the AC power cord supplied with the instrument. If the supplied power cord is lost or damaged and needs to be replaced, con-
tact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard!
The type of AC power cord provided with the instrument may be different depending on the country in which the instrument was pur-
chased. (In some areas a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.) Do NOT mod-
ify the plug provided with the instrument. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
N3 N2
Example
(The shape of the plug differs depending on locale.)
WARNING
WARNING
8
N3/N2 Owner’s Manual 11
Playing the Keyboard
ENGLISH
2
Opening the fallboard
Using the hand grip on the front, lift open the fallboard.
3
Opening the lid
One long stay and one short stay are provided on the lid. Use one of them to open the lid to the desired angle.
3-1 Hold the right side of the lid and raise it.
3-2 Raise the lid stay and carefully lower the lid so that
the end of the stay fits into the recess in the lid.
For the longer stay, use the inner recess, and for the
shorter stay, use the outer recess to support the lid.
Hold the fallboard with both hands when opening or closing it. Do not
release it until it is fully opened or closed. Be careful to avoid catch-
ing fingers (yours or others, especially children’s) between the fall-
board and the unit.
Do not place objects such as a piece of metal or paper on top of the
fallboard. Small objects placed on the fallboard may fall inside the
unit when the fallboard is opened and may be nearly impossible to
remove. This could cause electric shock, short circuit, fire or other
serious damage to the instrument.
If this happens, turn off the power immediately and unplug the power
cord from the AC outlet. Then have the instrument inspected by quali-
fied Yamaha service personnel.
Be careful to avoid catching your fingers
when opening the fallboard.
CAUTION
CAUTION
CAUTION
N3
Do not let children open or close the lid. Also, be careful to avoid catching fingers (yours or others, and especially those of children) when rais-
ing or lowering the lid.
CAUTION
Do not hold here.
Hold here.
Do not use the outer recess for the longer stay. Doing so makes the lid
unstable and may cause it to fall, resulting in damage or injury.
Make sure that the end of the stay fits securely in the lid recess. If the
stay is not properly seated in the recess, the lid may fall, causing
damage or injury.
Be careful that you or others do not bump the stay while the lid is
raised. Also, make sure to close the lid when moving the instrument.
If bumped, the stay may be dislodged out of the lid recess causing the
lid to fall.
Shorter stay
Longer stay
CAUTION
CAUTION
CAUTION
9
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha N3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha N3 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Yamaha N3

Yamaha N3 Gebruiksaanwijzing - Nederlands - 50 pagina's

Yamaha N3 Gebruiksaanwijzing - Deutsch - 49 pagina's

Yamaha N3 Gebruiksaanwijzing - Français - 49 pagina's

Yamaha N3 Gebruiksaanwijzing - Italiano - 50 pagina's

Yamaha N3 Gebruiksaanwijzing - Português - 50 pagina's

Yamaha N3 Gebruiksaanwijzing - Espanõl - 49 pagina's

Yamaha N3 Gebruiksaanwijzing - Polski - 50 pagina's

Yamaha N3 Gebruiksaanwijzing - Dansk - 50 pagina's

Yamaha N3 Gebruiksaanwijzing - Svenska - 50 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info